The black Countryman E6 Directional Earset Mic for Sony Wireless Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can anyone confirm if this will work with the new Bolt 4K LT 750 transmitter?

A: The Bolt 750 4k LT will only work with Vmount plates like the following. Vmount Battery side - https://www.bhphotovideo.com/c/product/1507496-REG/teradek_11_0854_pro_battery_plate.html Vmount Camera side - https://www.bhphotovideo.com/c/product/1500409-REG/teradek_11_0855_bolt_4k_v_mount_battery.html

Q: 2. What voltage are the two DC out sockets? i.e can I power a SmallHD DP4 monitor as well as the camera?

A: Yes you can power both units. Each output is 7.4 volts, you would need buy this cable to power the SmallHD DP4B&H # IN81PPC MFR # 81PPC

Q: 3. Will this work with the 150M receiver as well?

A: Yes, this is compatible with the Ghost Eye 150M and 400M transmitter and receiver units.

Q: 4. Does this antenna work with EM3532 (570-590Mz range) receiver?

A: The Sennheiser ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz) is not compatible with the Sennheiser EM 3532 Receiver.

Q: 5. Does this need the amplifier or can it run straight from the in ear system?

A: You can connect the Sennheiser ADP antenna directly to an EW-D receiver, EW-D AB antenna booster, or the EW-D ASA antenna splitter via a coaxial cable (all available separately).

Q: 6. This says via its 2-pin LEMO connector yet I see my receiver has 4 pins. I own the 400M unit. Am I missing something or the 2 pins will still work?

A: I have the 150m and the unit works great. I only see two pins on the power supply and two on my receiver. The pics I see on line of the 400m only show two pins and the manufacturer says it works with the 400m. Perhaps the unit you have is a different model or year than the pics I see on line, but I cannot find a 4 pin unit. Hope that helps. If you list a link with the pic of the 4 pin I will compare it to what I have and get back to you.

Q: 7. Will a NP-F970 battery fit in this plate?

A: Yes, this plate accepts Sony NP-F style batteries. You will be able to use an NP-F970 with it.

Q: 8. Is this backward compatible with Evolution G3/G4?

A: Yes you can use the ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz) with Evolution G4 and G3 rack receivers.

Q: 9. If only one DC out is used for the dummy battery into the camera, can all 4 batteries' power be directed to the one DC out? Or can only two batteries go to one DC out?

A: As it seems all 4 batteries goes to both the DC out. I have tried with 1, 2, 3 or 4 batteries when it was connected to my Sony camera, I can swap any of them without loosing power so all 4 must go to both the DC out at the same time.

Q: 10. Will this power a SmallHD 703 UltraBright (MON-703U) monitor?

A: We are unable to verify if this would work or not. Since it is third party, an independent service technician would need to verify it's viability as a power source. But instead of that rigmarole, we would recommend this instead by SmallHD. We know this will work. SmallHD 2-Pin LEMO to Wall Power Cable (12V, 4.5A) B&H # SMPWR212V45A.