The cocoa Countryman E6i Omnidirectional Earset Mic with 3.5mm Locking Connectoris a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the optimal transmitter / receiver for the MKE 2 Gold ?

A: The Sennheiser EK 100 G4 receiver & Sennheiser SK 100 G4 transmitter would be the ideal compatible solutions to use with the MKE 2 Gold. You can also use the Sennheiser SK AVX Digital Bodypack Transmitter & Sennheiser AVX EKP Camera-Mount Plug-In Receiver with the Sennheiser MKE 2 Gold.

Q: 2. Could I swap out (substitute) this mike foe the lavalier that comes with the Sony UWP-D11 or D16 kit?

A: Please email us at a href= http://sales@bhphoto.com target= _blank sales@bhphoto.com/a for this type of request. Thank you.

Q: 3. Is this 2.5mm on both ends?

A: Yes. 2.5 to 2.5mm

Q: 4. Would the MKE 2 be a good match with the DJI Mic? I'm not sure if the locking jack will be a problem.

A: No, the MKE 2 is not compatible for use with the transmitter for the DJI Mic Wireless Mic System. High-end lavalier mics are not a good match. We have tested a variety of lavalier mics and the ones that we have found to work best are the Saramonic DK3G Omnidirectional Lavalier Microphone with 3.5mm TRS Connector (B&H # SADK3G), the RODE Lavalier II Omnidirectional Lavalier Microphone (B&H # ROLAVALIERII), the Shure MOTIV MVL Omnidirectional Lavalier Microphone for Smartphones (B&H # SHMVL35MM), and the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (B&H # SASRM1).

Q: 5. I am looking for Senheiser AVX system with MKE2 mic and a compatible hanheld mic MMD 835 cardiode + compatible MD42 omnidirectional capsule with all accssories like camera mount etc.How much would be the cost of this bundle? Is it possible to use both lavelier and handheld mic at the same time with one AVX unit?

A: Thank you for your question. The AVX system with the MKE2 is the B&H # SEAVXMKE2STS. For the handheld you will need the B&H SESKMAVX4 transmitter and the B&H # SEMMD421 capsule. You cannot use both transmitter with a single receiver you will need a 2 receiver to use both mics simultaneously.

Q: 6. Will this work for Sennheiser ew 100 g3?

A: Yes it should it has a locking connector. Then I assume you want to come out of the receiver and into your phone.

Q: 7. Will this work with rode wireless go system?

A: The Sennheiser ME 4 Cardiod Lavalier Microphone has a locking 3.5mm TRS connector and the mic input on the RODE Wireless GO II transmitter uses a standard, non-locking 3.5mm connector, so the mic will connect, but it will not latch to the input on the transmitter for a completely secure connection.

Q: 8. Will it work with a Sony Wireless system?

A: The Pyle Pro PMEMSN12 is wired for Sennheiser Wireless Systems and will not work with a Sony system unless it is rewired for compatibility.

Q: 9. Will this work with Sony wireless systems?

A: No, they are not compatible.

Q: 10. is there an adapter to plug a Sennheiser over the ear mic to a Shure transmitter?

A: We do not have an adapter to convert this microphone for use with a Shure transmitter, but we do have the same microphone available with a TA4F connector that is wired for use with a Shure transmitter (B&H # PYPMEMS13).