The cocoa Countryman E6i Omnidirectional Earset Mic for Audio Technicais a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How long is the included xlr/phono cable?

A: The Audio technica BPHS1 ships with the BPCB1 cable which is 3.3 m (10.8') long. a href= http://bhpho.to/1zeJPSh target= _blank http://bhpho.to/1zeJPSh/a

Q: 2. Is the AT8035 moisture resistant?

A: No, the Audio-Technica AT8035 Long Shotgun Microphone is not moisture-resistant. As an option for a long shotgun microphone that is moisture-resistant, you can use the Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone (B&H # DESMIC2) or the RODE NTG3B Moisture-Resistant Shotgun Microphone (B&H # RONTG3B).

Q: 3. Hi, Would this mic be compatible with the sony hxr-nx100? If not could suggest a similar mic that would be. Cheers, -Mike

A: Yes, you can use the Audio-Technica AT875R with a Sony HXR-NX100 camera.

Q: 4. what connection is used on the back side of the plate?

A: Connections are three set screws bearing down on silver plates...tin your wires and trim to a quarter inch, then inserrt each under the plate and tighten down the set screws...could not be easier...first you might place a heat shrink tube on the cord (heat shrink inside diameter large enuff to fit over the set screw mounting) and that will help prevent the cord from being yanked out...

Q: 5. Will this mic work with Nikon D3200? I'm not sure whether D3200 has a plug-in power supply, but it does has external stereo mini-pin jack (3.5mm diameter).

A: It works great on he canon 3ti...and should be the same on the Nikon.

Q: 6. Does this mic work with the Nikon D90?

A: No. The D90 does not have an external mic input.

Q: 7. Can this mic pick a sound from a distance like 5 or 6 feet?

A: Yes, it will still pick up audio at that distance, however for better sound quality try to stay within a 3-5 feet range from the subject you recording.

Q: 8. What is the length, in cm, of the grill so I can determine which size fuzzy windscreen? Thank you!

A: Windscreens are generally measured by diameter, and the diameter of the Audio-Technica AT875R Short Shotgun Microphone is 0.83"/21 mm. B&H # AUWSS2012 would be recommended as an outdoor windscreen for this model.

Q: 9. Does this come with a mic holder if I'm not using it with a shock mount?

A: There is a mic holder that comes with this that will screw onto standard mic stands. I've never used it as I've always had this used on a video camera, but I assume it will work ok.

Q: 10. Is this compatible on a Sony Mirrorless A7R IV?

A: Yes, the Audio-Technica Pro-24CM - Stereo Microphone is compatible for use with the Sony a7R IVA Mirrorless Camera.