The black Countryman E6 Earset Mic for WisyCom Transmitters, Blackis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What size/spec is the DC plug on this adapter?

A: The size/spec is not listed. According to Landparte, it is a standard interface. Once in hand it should be easy to determine what size it is. It would be one of the sizes listed on this page. a href= http://wikipedia.org/wiki/Coaxial_power_connector. target= _blank wikipedia.org/wiki/Coaxial_power_connector./a Unfortunately is it not possible for us to pull stock from the warehouse to determine what the size is.

Q: 2. What kind of stand do I need for this?

A: The Auray MS-5130 Round Base Microphone Stand, B&H # AUMS5130 or the Auray MS-5230 Tripod Microphone Stand, B&H # AUMS5230 would be good options for mic stands for this multi mic holder.

Q: 3. Is this going to work with the Sennheiser EW-D transmitter? SKM-S. I'd like to replace the 835 mic capsule with this item. Thnx!

A: Yes, the Sennheiser MMD 935B Cardioid Dynamic Capsule can be used with the Sennheiser EW-D SKM-S Digital Wireless Handheld Transmitter.

Q: 4. I do not see a hole for the power cord on the 5D Mk IV - guessing I need to a slight door modification?

A: The opening for the power cord on the Canon EOS 5D Mark IV DSLR Camera is covered by a rubber flap on the edge of the battery door (located on the inner side of the camera grip).

Q: 5. Will this coupler work with the AC adapter (brick) that comes as part of the Canon ACK-E4 AC Adapter Kit (for 1D3, 4, and X)? I already have several of those, so would like to just add the coupler (to fit a 5ds) rather than buy the whole ACK-E6 kit.

A: No, it will not work with the ACK-E4 AC adapter.

Q: 6. What's the male plug size on the end? 5.5mm?

A: I don't remember. I cut mine off and replaced it with a mate to my 12v power supply. In other words, it doesn't matter. Replace it with whatever you want it to be. Just get the polarity right.

Q: 7. Will this battery fit on a Canon 80D? The one comment says a 6N will not fit on his Blackmagic video assist monitor which I find odd as the only difference between the LP=E6 & LP-E6N is 65mah of capacity.

A: It has not been tested but there is no technically reason we see why it would not work.

Q: 8. Can anyone recommend a device so I can attach this DC coupler to a V-Mount battery source?

A: You could use a v-mount battery plate like this from SmallRig: https://www.bhphotovideo.com/c/product/1643740-REG/smallrig_3203_v_mount_battery_adapter_plate.html

Q: 9. Will this work EOS R5C 8K 60P RAW?

A: This will work on the R5C regardless of the frame rate.

Q: 10. Will this work with EOS R5C?

A: Yes, the EOS R5C will work with the Canon DC DR-E6 coupler.