The cocoa Countryman E6 Directional Earset Mic, Medium Gain, TA4F Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I use the USB output of the Titon Base to power my Fujifilm X-H2S via USB-C, or should I buy a D-TAP to USB-C adapter?

A: The USB port on the Anton/Bauer 68Wh Titon Base Battery does not support PD (regulated power delivery). It will be required to get a D-TAP to USB-C PD adapter to power your camera.

Q: 2. How after charging the battery turn off for preservation of the charging

A: The Anton Bauer 68Wh Titon Base Battery will turn itself off automatically. The Titon Base will shut off after a few minutes when it is not connected to the power supply or accessory that requires power.

Q: 3. Yes, the battery turn off itself when is not on use but... why after not use I still seeing the percentage that indicates that is still ON?

A: According to Anton Bauer for the Anton Bauer 68Wh Titon Base Battery: "When the battery is sitting idle (no load is applied) the LCD will show remaining capacity as percentage of full.", "When the battery is powering an item (a load is applied), the LCD will display remaining run-time in Hours/Minutes." https://bit.ly/3ovafOR

Q: 4. Can anyone tell me which cable is needed? I figured this came with everything you needed. Thanks

A: As long as you are powering a device tghat operates with te Canon LP-E6 battery, the Anton/Bauer Titon Base Kit for Canon LP-E6-Powered Cameras has everything in the box.

Q: 5. When using an FX-3 is there any “wobble” with the Anton Bauer plate?

A: The baseplate on the Anton/Bauer 68Wh Titon Base Battery can be unstable at times.

Q: 6. Which version will work with a Canon R5?

A: At this time we do not have an option with the proper connection for the EOS R5.

Q: 7. Can you use this for audio input on a live-stream?

A: Yes, the Saramonic SmartRig+ Di can be used to connect microphones and/or instruments for live-streaming audio.

Q: 8. Will the Anton Bauer Titon Base (14V DC output) work for bmpcc HD (original) since it accepts only 12V input. Thanks

A: Yes, you should get the kit that includes the power cables. Anton Bauer Titon Base Kit for Blackmagic Design Pocket 4K/6K with 2-Pin Connector and LP-E6 Dummy Battery https://www.bhphotovideo.com/c/product/1596781-REG/anton_bauer_8275_0130_titon_base_kit_for.html

Q: 9. Will this work with the Cisco Webex Meetings app on iOS?

A: According to Saramonic's marketing team, the SmartRig+ is not recognized by the Cisco Webex Meetings app on iOS. The iPhone does recognize the SmartRig+ when it is used to connect your external microphone, but once the Webex app is loaded, it is no longer recognized. Although the SmartRig+ is not compatible with the Webex app, it does work with Zoom.

Q: 10. Does this unit have any mounting holes on the back, to attach to a rig if using for microphone input to an iPhone?

A: The Saramonic SmartRig+ Di has a 1/4''-20 thread on the back of it.