The cocoa Countryman E6 Directional Earset Mic for Audio Technica Wirelessis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How long is the included xlr/phono cable?

A: The Audio technica BPHS1 ships with the BPCB1 cable which is 3.3 m (10.8') long. a href= http://bhpho.to/1zeJPSh target= _blank http://bhpho.to/1zeJPSh/a

Q: 2. Would this microphone work with the Lumix G7?

A: Hi, No this microphone will not work this camera directly. I would recommend instead the Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone with Location Recording Bundle BH# DEVMICD3PROK - https://www.bhphotovideo.com/c/product/1449001-REG/deity_microphones_vmicd3prokit_v_mic_d3_pro_location.html. I hope this is helpful, thank you for shopping at B&H!

Q: 3. Does this come with a mic holder if I'm not using it with a shock mount?

A: There is a mic holder that comes with this that will screw onto standard mic stands. I've never used it as I've always had this used on a video camera, but I assume it will work ok.

Q: 4. Can this mic pick a sound from a distance like 5 or 6 feet?

A: Yes, it will still pick up audio at that distance, however for better sound quality try to stay within a 3-5 feet range from the subject you recording.

Q: 5. Currently we have circular grommets that fit old microphone mounts. Will these new mounts fit our current grommet holes?

A: XLR inputs are a standard size so the grommets you have should fit into the circular holes. It is difficult to determine whether there may be any difference in the thickness of the plate on your old mic mounts to know whether or not the grommets you have will match the thickness of the plate on this mount. But there is a good chance that they can be a match.

Q: 6. How do you charge it?

A: Runs on AC or AA Batteries Alkaline or Niamh full specs in in the manual click on "Overview" on the web page and go page 32 on the manual on the right hand side.

Q: 7. does this require phantom power?

A: It does not. The microphone is dynamic.

Q: 8. Could one get power from a POE connection for a ptz camera to provide the phantom power for this mic connected to a ptz camera?

A: Microphones are not wired to accept PoE instead of phantom power, unfortunately, even though the voltage can be similar. In addition, regardless of whether a microphone requires 48V phantom power, it will also always require amplification first, before it can connect to the input on the PTZ camera. This is because the signal provided by a microphone is "mic level" voltage, which is much lower than the "line level" voltage your PTZ camera expects, and even when powered by 48V, the signal voltage will be the same. A microphone preamplifier is required to bring this signal to a useable level. You could use the Rolls MP13 Mini-Mic Preamp (B&H # ROMP13) with an XLR female to 3.5mm TRS cable such as the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable - 3' (B&H # KOXRSM03B), in any length you prefer, to connect to the camera's 3.5mm input. The Audio-Technica AT8035 Long Shotgun Microphone requires 11 to 52V for power and the Rolls MP13 can supply 24V. You will also need to use a standard XLR mic cable like the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - 10' (B&H # KOM3010), in any length you prefer, to connect the AT8035 microphone to the mic input on the MP13 preamp.

Q: 9. What version of Bluetooth and are they on the aptX standard?

A: The Audio-Technica Consumer ATH-M50xBT2 Wireless Over-Ear Headphones (Black) BH #AUATHM50XBT2 are Bluetooth version 5.0.

Q: 10. Will this mic work with Nikon D3200? I'm not sure whether D3200 has a plug-in power supply, but it does has external stereo mini-pin jack (3.5mm diameter).

A: It works great on he canon 3ti...and should be the same on the Nikon.