The cocoa Countryman E6 Omnidirectional Earset Mic for Azden Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What size/spec is the DC plug on this adapter?

A: The size/spec is not listed. According to Landparte, it is a standard interface. Once in hand it should be easy to determine what size it is. It would be one of the sizes listed on this page. a href= http://wikipedia.org/wiki/Coaxial_power_connector. target= _blank wikipedia.org/wiki/Coaxial_power_connector./a Unfortunately is it not possible for us to pull stock from the warehouse to determine what the size is.

Q: 2. Is there a power adapter cable that will allow me to power from a battery pack?

A: The DC Coupler DR-E6 is strictly for use with the Canon AC-E6N AC Adapter. Using the Tether Tools Relay Camera Coupler for Canon Cameras with LP-E6 Battery, BH # TECRCE6 with the Tether Tools Case Relay Camera Power System, BH # TECRUPS110 will allow you to power your Canon camera from a Jupio PowerVault III 2-Port USB & Wireless 10,000mAh Powerbank, BH # JUJPV0310. https://bhpho.to/3svG9xJ https://bhpho.to/3Jh4P2I https://bhpho.to/3emlGmw

Q: 3. Can I use this to power a small HD 502 bright in to a 12 volt port?

A: the monitor is powered by the LP-E6 battery. There are several manufacturers of the dc couplers

Q: 4. How long is the cord?

A: The EX503L features a 1.3 meter cable (4.26 feet).

Q: 5. I hear a lot of people recommending Canon LP-E6N's. Do the Canon batteries perform better than the BMD batteries, even at a lower capacity? Why wouldn't they just buy these?

A: the quality demand of Canon and other camera manufacturers are much higher the other makers. also they should last longer

Q: 6. does it fit to canon 5s mark 4?

A: It has not been tested in the 5D Mark 4 but it should be compatible.

Q: 7. I found this by following a link to:Canon AC Adapter Kit ACK-E6B&H # CAACKE6 MFR # 3351B002 It is considerably cheaper, so how is the other one better? I am looking to find a way to keep a charge during a multi-day time lapse.

A: The Canon AC Adapter Kit ACK-E6 includes the Canon DC Coupler DR-E6. If you need to power your camera with AC, then you need the kit. If you already have the part that plugs in to the wall and just need to replace the coupler (replaces your camera battery and plugs in to the brick that goes to the wall outlet), then you just need the coupler.

Q: 8. will this work in a 6D?

A: Technically yes but you need to remove the door as I don't think it will close with wire there.

Q: 9. I may have missed it, but I can't seem to find the length of the wire - how long is the wire? Bonus question - what would be a good extension if I needed to extend the wire?

A: The cable length is about 4 feet. I don't have a specific extension to recommend, but you'll want to look for a mono audio cable that is 3.5mm TS female to 3.5mm TS male.

Q: 10. If I combine this with a MiCon-1 adapter can I use it in my RodeLink?

A: No - the MiCon adapter are for RODE lavalier mics only.