The cocoa Countryman E6 Omnidirectional Earset Mic for Comtek Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. will this work in a 6D?

A: Technically yes but you need to remove the door as I don't think it will close with wire there.

Q: 2. Does this work with the new Canon EOS R?

A: Yes, the Canon DC Coupler DR-E6, does work with the New Canon EOS R.

Q: 3. I do not see a hole for the power cord on the 5D Mk IV - guessing I need to a slight door modification?

A: The opening for the power cord on the Canon EOS 5D Mark IV DSLR Camera is covered by a rubber flap on the edge of the battery door (located on the inner side of the camera grip).

Q: 4. Will this work for the edelkrone products?

A: Yes this battery can fit Edelkrone products like the HeadONE.

Q: 5. Hi - just rec'd a crane 2 for use with a canon 70D - can this coupler use/plug in to the power from the Crane 2 batteries to power the camera?

A: Yes. you'll need the DR-E6 , B&H # CADRE6 . see illustration in Zhiyun manual below, page 22. https://static.bhphotovideo.com/lit_files/371635.pdf

Q: 6. What else do you need to make this work for a power source on a Canon 60d?

A: You will need the Canon AC-E6N adapter. Click the link below to view; https://bhpho.to/3imalUo

Q: 7. I found this by following a link to:Canon AC Adapter Kit ACK-E6B&H # CAACKE6 MFR # 3351B002 It is considerably cheaper, so how is the other one better? I am looking to find a way to keep a charge during a multi-day time lapse.

A: The Canon AC Adapter Kit ACK-E6 includes the Canon DC Coupler DR-E6. If you need to power your camera with AC, then you need the kit. If you already have the part that plugs in to the wall and just need to replace the coupler (replaces your camera battery and plugs in to the brick that goes to the wall outlet), then you just need the coupler.

Q: 8. anyone know if this works for the 6dmk2?

A: 6D mk2 runs with LP-E6N batteries, and accordingly this works for it

Q: 9. Does this work for the new Canon EOS R?

A: Yes, the Canon DC Coupler DR-E6, does work with the New Canon EOS R.

Q: 10. What size is the barrel connector, 2.1 x 5.5mm?

A: Yes, the barrel connector of the LanParte E6 Battery Dummy Pack (B&H# LAE6P01) has a 2.1mm center pin and can accommodate a barrel connector that has an outer diameter of 5.5mm.