The cocoa Countryman E6 Omnidirectional Earset Mic, Medium Gain, 2mm Cableis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. is this regulated? hate to fry my monitor

A: Yes, this cable is voltage regulated.

Q: 2. What type of protection does this device provide to assure that my camera will not be damaged, i.e output voltage regulation, short circuit protection, overvoltage protection?

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable (B&H# ZIZRUCDB04) is designed to produce the appropriate electrical power for cameras using Canon LP-E6 series batteries (e.g. LP-E6, LP-E6N, and LP-E6NH) based upon a standard USB Power Delivery (PD) source. Canon mirrorless cameras that accept PD-compliant power sources typically work well when that source is 45W or more. PD technology determines the appropriate power requirements and then electricity is delivered at the most beneficial voltage and amperage from the power source (e.g. a PD-capable battery pack, a PD-rated AC adapter, etc.) Thus the process by which the appropriate determination is made depends not just on the cable but also on the PD-compliant source. The specifications of the process and configuration of the regulation and sensing techniques are standardized. However, the process and any regulation that may occur after such a transformation occurs is not disclosed by the manufacturer.

Q: 3. Will this work with any battery pack with a 45w or more PD port on a R5? Or does it have to be a ZILR battery or Anker?

A: The ZILR USB-C to Canon LP-E6 Dummy Battery Cable could be used with any charger or battery that supports USB-C PD power output.

Q: 4. Any info as to whether this will mitigate overheating issues while filming 4K on a R6?

A: Powering through an external battery is certainly a method to help mitigate heat build up in the battery slot on the Canon EOS R6 Mirrorless Camera. The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is one approach to take.

Q: 5. Is the voltage regulator located within the dummy battery, or as an in-line cable regulator?

A: This is not listed as a regulated adapter. For a regulated option we suggest the IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable (30"), B&H # INPTLPD. https://bhpho.to/34wv4Nc

Q: 6. Could this power the Canon r5c?

A: Yes, the Core SWX Powerbase EDGE Cable for Canon LP-E6 Devices would work when the adapter is connected to a SWX Powerbase EDGE battery. Please note that only USB-C battery solutions will power the R5C when recording 8K above 30fps.

Q: 7. Will this work with a BlackMagic Pocket 4K?

A: Yes, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable will work with the Blackmagic Pocket Cinema Camera 4K.

Q: 8. What are the dimensions?

A: The PortaBrace Clear Plastic Cable Pouch (Medium) measures 8.25" x 9".

Q: 9. Is there an extension from this barrel plug to the Core SWX Battery? I noticed that this isn't a standard barrel plug & I cannot find the same standard used elsewhere.

A: Yes there is. BH #COPBECEXT is the Core SWX Powerbase Edge Cable Extension (18"). https://bhpho.to/3cOHAPO

Q: 10. Can this fully power a Canon R5C when filming in 8k/60fps?

A: The IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable (30") (B&H# INPTLPD) may be used to replace the functionality of an LP-E6, LP-E6N, or LP-E6NH battery. It is regulated to provide the requisite 7.2VDC at up to 2A. That is sufficient to equal the functionality of that battery. Users of the Canon EOS R5 C Mirrorless Cinema Camera (B&H # CAER5C) should keep in mind that it will not provide the higher voltage and wattage of the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) that is required for full electronic lens control at frame rates above 30p in 8K, above 30p in 5.9K, or above 60p in 2.9K modes.