The cocoa Countryman E6 Omnidirectional Earset Mic for Line 6 Wirelessis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Line 6 TBP12 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the Sescom LN@MIC-TASDR100 work with a Panasonic gh4?

A: Yes, the Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable will work to adapt a line level output device signal into the microphone input on the Panasonic Lumix GH4 Mirrorless Camera.

Q: 2. Does this cable work between Panasonic Lumix S1R and Zoom H6? thanks,

A: Hi Edward. That is correct, for the Zoom H6 recorder, we recommend this cable or LN2MIC-ZMH6-MON assembly. Thank you!

Q: 3. what is the width of the flexible cable (not the plug which is 3.5mm)?

A: I am not sure I completely understand your question. If you could rephrase that it would be extremely helpful. Specs for the EAC64CL - (Clear 3.5mm cable that is included) The cable it's self is 64 inch long. The part of the cable that loops around your ear is 3 inches long. The diameter is 1/8 of an inch wide.

Q: 4. is this used to get rid of hum?

A: Yes, this device typically will remove the 60Hz AC hum generated by connecting two devices that are not sharing the same AC ground.

Q: 5. Is there the same type cable as this but longer than 9"? I need it for a GH5 on a gimbal.

A: I would say 12 to 14 inches.

Q: 6. Would this be able to hook line out of zoom H6 into mic input of another recorder (h1n or computer) for a back up recording of zoom h6? Or can you just use a regular 3.5mm aux cable? Thank you!

A: Yes, you can use the attenuator cable to connect the line out from the H6 into the mic input of another recorder. If the second recorder that is being used for the backup recording accepts line level input signal, then you can use a standard 3.5mm TRS to 3.5mm TRS aux cable. As an example, Zoom's H1n accepts mic and line level through its 3.5mm TRS input. Just check the specs for the audio inputs on your backup recorder to be sure of what type of signal it accepts.

Q: 7. Is this the most universal headset for Motorola 2 way radios? I work music events so the two way radios I use vary between jobs and I would like to have my own personal headset.

A: Motorola has different connection types many of which are 2-pin configuration. This specific headset will work on :CLS, CP, DTR, RDU, RDV, RMM, RMU, RMV, and DLR radios.

Q: 8. This attenuator cable is -25 dB. Other cables are -35dB. What cable is more suitable for Tascam DR40, 40X ?

A: If using this to connect a DR40 into a camera, the -25db cable would be fine to ensure a strong enough level into the preamp of the camera while not overloading it.

Q: 9. Will this work to connect my Canon t4i to my Zoom H1? Need to be sure.

A: Yes it will work and is a compatible compatible cable.

Q: 10. does it work with Nikon d850?

A: Yes it is compatible with the D850 as well. It works with any Nikon camera that has the 10 pin remote connection.