Altman 490W Led Follow Spot With Tripod Stand & Powercon Cable

Altman 490w Led Follow Spot With Tripod Stand & Powercon Cable

Product Code: eq76446
Availability: In Stock

$13,664.34 $19,676.65

Qty

7 reviews Write a review

Description
Reviews (7)

This Altman 490W LED Follow Spot with Tripod Stand & PowerCON Cableis an extruded aluminum fixture with a black finish, and it comes with a tripod stand and 5' long powerCON cable with an Edison plug. It features an LED light engine with a native cool white color temperature of 11,808K and incorporates a selectable color wheel that provides you with a choice of light output of 4200, 6000, or 7500K. The fixture has a manual zoom range of 7 to 13° for precise beam spread adjustment over a distance range of up to 150'.

The fixture features an onboard controller that allows you to locally control the fixture's color, dimming, strobe rate, color correction, and the 18-facet motorized iris. It supports DMX control as well, supporting the DMX512A protocol and using six channels, allowing you to remotely control the fixture as well as daisy-chain the fixture as part of a DMX universe. An optional front-end accessory holder enables using a variety of third-party accessories.

11,808K Native Color Temperature CTO Color Wheel for 4200, 6000 & 7500K 7 to 13° Manual Zoom DMX or Local Control

Parameters
Material of Construction	Fixture Housing: Extruded and Die-Cast Aluminum Construction
Light Engine	490 W Cool White Array Strobe Rate: 1 to 20 Hz
CRI and CQS Ratings	11,808K CCT CRI (Ra): 79 CQS: 69 7415K CCT CRI (Ra): 76 CQS: 69 6040K CCT CRI (Ra): 75 CQS: 69 4234K CCT CRI (Ra): 76 CQS: 69
Beam Angle	7 to 13°
Photometrics	11,808K CCT at 7° Spot (Sharp Focus) Delivered Beam Lumens: 10,820 At 40' Throw Distance: Field Diameter: 4.19' / 1.28 m Foot Candles: 596 Lux: 6415.3 At 100' Throw Distance: Field Diameter: 13.11' / 4 m Foot Candles: 95.3 Lux: 1025.3 At 150' Throw Distance: Field Diameter: 19.66' / 5.99 m Foot Candles: 42.3 Lux: 455.7 11,808K CCT at 13° Spot (Sharp Focus) Delivered Beam Lumens 10,820 At 40' Throw Distance: Field Diameter: 9.11 / 2.78 m Foot Candles: 207.8 Lux: 2236.9 At 100' Throw Distance: Field Diameter: 21.02' / 6.41 m Foot Candles: 33.3 Lux: 357.9 At 150' Throw Distance: Field Diameter: 31.53' / 9.61 m Foot Candles: 14.8 Lux: 159.1
LED Lifetime	50,000 Hours
Connectors	Protocol: DMX512A Channels: 6 Control: 2 x 5-Pin XLR (1 x Input, 1 x Output)
Power	Input Voltage: 100 to 240 VAC, 50/60 Hz Current Draw: 4.08 A at 120 VAC, 2.13 A at 240 VAC Quiescent Load (Fans On, Lamp Off): 0.39 A at 120 VAC (46.8 W) Fuse: T5A, 250 V Connector: powerCON
Certifications	cETLus Listed, CE (Indoor Use)
Environment	Temperature Range: 32 to 113°F / 0 to 45°C Humidity: 5 to 95% (Non-Condensing)
Dimensions	Fixture: 30.5 x 7.75 x 10.38" / 77.47 x 19.69 x 26.37 cm (Fixture) 30.5 x 11.75 x 10.38" / 77.47 x 29.85 x 26.37 cm (Fixture and Yoke) Stand: Fully Extended: 54.3" / 137.92 cm Folded: 43.8" / 111.25 cm Leg Circle: 42.9" / 108.97 cm
Weight	Fixture: 25.5 lb / 11.57 kg Stand: 12 lb / 5.44 kg
Packaging Info
Package Weight	58.86 lb
Box Dimensions (LxWxH)	49 x 20.25 x 16.5"

DMX or locally controlled:

Intensity (dimming)
Touch button color selection
Halftone (split) color selection
Native CCT of 11,808K Native with CTO wheel offering 7500K, 6000K, and 4200K
Iris
Strobe (from 1 to 20 Hz)
LED on/off
18-facet motorized iris

Please note, the fixture is not RDM enabled.

The fixture includes a black folding tripod support stand that you mount the light on via the fixture's yoke.

The follow spot manually pans and tilts as controlled by the light operator. It has a range of 360° panning and -40 to +30° tilting.

The fixture features a powerCON connector, and it includes a 5' long powerCON cable with an Edison plug.

Related Questions and Answers

Q: 1. Which is the best mount for the L7-C LE2 LED Fresnel for using on location?

A: A Matthews Hollywood Combo Steel Stand - 14.75' (4.5m) B&H # MALSCHWT would be a suitable stand to hold this light on location.

Q: 2. What is the difference with the addition of LE to this fresnel's product name?

A: This is the LE2 version, which is 25% brighter than the original Arri L7C.

Q: 3. What is the MINIMUM and maximum actual power consumption of the L7-C LE2 LED Fresnel?

A: The specifications for the ARRI L7-C LE2 LED Fresnel lists the maximum power consumption of the light fixture is 220 watts and the nominal (minimum) power consumption is 160 watts.

Q: 4. Does this item include the power adapter? Can this lamp plug directly in a standard US A/C outlet?

A: This light does include a power supply which connects to an AC outlet that works on 100 - 250 VAC.

Q: 5. Anyone know what the minimum working height is on this stand?

A: The minimum working height of the Kupo 2-Section Wind-Up Follow Spot Stand (Chrome, 4.8') is approximately 46"

Q: 6. What is the best battery for powering the L7-C LE2 LED Fresnel on location? What accessories are needed to use the L7-C LE2 LED Fresnel like this?

A: While the power option for this light is mainly AC, you could connect it to a generator which is able to hold the power draw of the light.

Q: 7. What is all the differences between Edison and Yoke mount for L7-C LE2 LED Fresnel?

A: The version of this light listed as Edison refers to the plug interface for AC power. The right yoke type depends on how the light will be set up. A manual yoke is used for those mounting the light to a stand. With a pole operate yoke, that would allow you to control the panning or tilting of the fresnel when it is placed out of reach, such as when using it on a ceiling truss or grid.

Q: 8. What is the footprint diameter?

A: According to the manufacturer, the foot print diameter is approximately 40 inches on the American DJ Pro Follow Spot Stand.

Q: 9. Your website spec shows a color temp of 3000K but the ADJ website shows a color temp of 6000K. Can you confirm if 3K or 6K?

A: American DJ said that the color temp is 6000k.

Q: 10. Can the tv be mounted horizontally and vertically?

A: Yep...

Joe	13/08/2024
[7 to 13°] Locks snugly. Price point is very good. Overall great connector. Used these to make my own Quasar T-12 power connectors. Saved a ton of money doing it myself. Just be careful. If you put it together, like I did, just to see how it works, you have to use some vise grip pliers to unscrew it. It has a ratchet locking mechanism to prevent it from unscrewing. You'll have to probably reset the metal spring washer, but it's no big deal. This information was hard to find on line. 5

Pavel	18/07/2024
[50,000 Hours] I use these connectors as a DIY analog of Festool power connector. So, you can have a single cord going to your work area, very short power cords (less than a foot) attached to tools, and quickly connect/disconnect the tools to that one shared power cord. That helps a lot when there is not much space to work in, and makes tools a lot easier to put away. These connectors are surprisingly easy to install, basically just strip the cable and tighten three screws. 5

Kenneth	17/06/2024
[7 to 13°] I am extremely pleased with the purchase of this very sturdy stand for use with my 180w RGBW Ellipsoidal Follow Spot Light. The stand, along with the smooth gliding FS Pan Glide hold my follow spot firmly and glide smoothly! Very pleased with these two items!! Ken Schleifer 5

Thomas S.	26/05/2024
[58.86 lb] I do panoramic photography, often shooting from a pole. In the last 6 months I have had 2 cameras slip out of apparently well tightened arca-style clamps and fall. So now I am using this fine little safety cable religiously. I leave one of these cables permanently attached to each of my pano heads. The little extra time it takes to clip the cable to the camera's strap ring is nothing compared to the peace of mind it creates. 5

OSU	13/05/2024
[58.86 lb] Used to safety strobes to stands 5

Sean	11/05/2024
[58.86 lb] I use this stand for mounting a video projector & it works very well. compact footprint, solidly built and at a great price. Would also work for smaller powered speakers, lighting, etc. You'd need to modify the top of the pole to pop a speaker on it, but totally do able. 5

Keith	01/04/2024
[7 to 13°] I am always worried about crappy thin walled tripod stands. But as this is listed as a followspot stand, I decided to give it a try... best thing I could have done to upgrade my old crappy followspot stands!! I paired this stand with the ADJ pan glide topper and now I think my spot ops are going to be VERY happy with the operation. The bottom set screw is a bit weird, but I'll get used to it. 5