By balancing the pan, tilt, and roll axes around a central handle, the Flycam Redking Stabilizer with Vista-II Arm & Vestallows you to achieve smooth-moving cinematic shots as you follow your subject. It works to stabilize and keep the camera horizontally balanced as you walk, run, climb stairs, and otherwise move about. The Redking supports up to 15 lb loads, so in most cases you can mount your camera along with a matte box, mic, or other accessories you may need for the shot.

The base on the bottom features 16 thin weight plates that can be used or removed to find the ideal counterbalance for your camera load, in order to ensure optimal stabilization. The base can also be expanded in width to further help with counterbalance. And the center post is height-adjustable telescopically, from 21 to 32", for vertical counterbalance.

The Redking features a quick release camera mounting platform and comes with a quick release camera plate so you can attach/remove your camera efficiently. The camera plate is Manfrotto 501 compatible, so you can also efficiently move your camera between the stabilizer and most tripods or other camera supports.

3-Axis Stabilizer, 7.5 lb Payload    Vista-II Body Vest & Shock-Absorbing Arm    Vest Waist & Height Adjustment    Dual Springs with Adjustable Elasticity

• 3-axis ball bearing rotational control, 15 lb payload
• Height-adjustable center post (21 to 32") with scale marks
• Width-adjustable base (11.5 to 15") with 16 removable counterweight plates
• Quick release camera platform
• Manfrotto 501-compatible quick release camera plate with a 1/4"-20 mounting screw
• Foam-cushioned handle

Related Questions and Answers

Q: 1. Will this setup work with a BMPCC 5k setup?

A: Yes, following unit will support a payload of 7.5 lbs.

Q: 2. What is the thread count on the tightening nuts for securing the weights to the base this system.

A: The length of the screw holding the counterweights is 63mm. It has a total count of 59 threads. The tightening nuts has a total of 8 threads count and it is 11mm tall.

Q: 3. Can this support more than 12lbs? Here it says 7.5lbs, but the manufacturers site says 7kg (which is around 15lbs)

A: This supports up to 15lb.

Q: 4. Will the Flycam work with a lightweight camera like my Panasonic Lumix DMC-LX100 camera? It weighs 1 lb.

A: Yes, the following unit will accommodate any unit up to a15 lb payload.

Q: 5. Works with a Nikon D3400?

A: You would be able to use the stabilizer with the Nikon D3400.

Q: 6. would this unit handle a Panasonic AG-CX350 ok? The camera weighs in at 4.19lbs

A: Yes it will. This stabilizer handles a 7.5 lb payload.

Q: 7. Doe this flycam have a video on and off switch?

A: It does not. This product does not offer any electronics that connect to a camera.

Q: 8. Is it possible to use this device for standing viewfinder shooting?

A: The FLYCAM Galaxy Arm and Vest Kit with Redking Camera Stabilizer (B&H# FLCMGLXYRKQ) can be used to hold up the stabilizer such that the viewfinder of some (but not all) cameras mounted on it would be usable. If you need to raise the camera further then you might consider adding a riser plate or another other similar product such as the CAMVATE Quick Release Baseplate with 15mm Rod Clamp & Vertical Adjustment (B&H# CAC2649). See below: https://bhpho.to/3wn6mze

Q: 9. In the listing without the vest it states that Redking can support up to 15lbs, here it states 7.5lbs. Are these different models of Redking?

A: It is the same RedKing Stabilizer with a 15lbs payload capacity, however, 7.5lbs is the maximum payload that you can use without damaging the Vest Arm. The Vest Arm only supports 22lbs including the weight of the RedKing Stabilizer, Payload and Counterweights.

Q: 10. Can this be reversed for low to ground shots?

A: Yes, the Flycam Redking can be used in underslung mode.