The light beige Countryman E6i Omnidirectional Earset Mic, TA4F Connector, Light Beigeis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to Paso MW223 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Paso Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it interfere with the DJI Wireless Mic like the Rode Lavalier Go?

A: The Saramonic SR-M1 is compatible with the DJI Mic transmitter units.

Q: 2. Will this work with a Windows PC that has a USB C port?

A: Yes you can use the Saramonic LavMicro U3B with a Windows PC that has a USB-C port.

Q: 3. Is it analogue microphone?

A: Technically, yes, but in this instance, no, The microphone itself is analog, however the USB-C on the LavMicro U3B Omnidirectional Mic has a 16 Bit A/D converter, which means it is sending a digital signal over USB-C, and not an analog audio signal.

Q: 4. Will this work with a Rode go system?

A: This microphone is designed to connect directly to the lightning port of your iPhone or iOS device. It will also connect to the RODE Wireless GO transmitter. NOTE: Multi-Section, Multi-Use Cable: The cable is made of two sections: a first section with the lav mic at one end and a 3.5mm TRS female connector at the other, and a second section with a 3.5mm TRS male connector at one end and an MFi Certified Lightning connector at the other. This two-section cable facilitates multiple purpose. Use the first section of the cable to route the mic into iOS devices that still offer conventional 3.5mm jacks. Conversely, the second section can be used to connect either the lav mic or any audio device with a 3.5mm TRS output (including wireless receivers and media players) to your iPhone or iPad.

Q: 5. Is this compatible with Boya WM4 wireless system?

A: Yes this mic would work woth the Boya WM4

Q: 6. Would the MKE 2 be a good match with the DJI Mic? I'm not sure if the locking jack will be a problem.

A: No, the MKE 2 is not compatible for use with the transmitter for the DJI Mic Wireless Mic System. High-end lavalier mics are not a good match. We have tested a variety of lavalier mics and the ones that we have found to work best are the Saramonic DK3G Omnidirectional Lavalier Microphone with 3.5mm TRS Connector (B&H # SADK3G), the RODE Lavalier II Omnidirectional Lavalier Microphone (B&H # ROLAVALIERII), the Shure MOTIV MVL Omnidirectional Lavalier Microphone for Smartphones (B&H # SHMVL35MM), and the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (B&H # SASRM1).

Q: 7. What is the difference between the Sennheiser MKE 2 Gold and the Sennheiser MKE Essential?

A: The MKE Essential is an economically priced lavalier mic based on the MKE2 Gold model. The Essential uses the newly designed KE4 mic capsule, which can handle high sound pressure levels, and provides a warm and clear vocal tone for small productions or stage presentations. The MKE 2 Gold is Sennheiser's premium model, known and and used in the high-end broadcast production and professional theater worlds. The Essential MKE will give you that rugged design, miniature form factor and premium sound quality of the MKE2 at a lower price.

Q: 8. Does it work with rode wireless go II? As I know not every lav mic with Rode wireless go II.

A: Yes, the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector will work with the Rode Wireless GO II transmitter units.

Q: 9. Will I have quality drop by plugging the 3.5mm variant of this mic into a Zoom H6 using a 3.5mm to XLR adapter?

A: The quality should be fine as long as the proper adapter is used. We recommend this adapter for your application: https://www.bhphotovideo.com/c/product/327244-REG/Ambient_Recording_EMP35_P48_Electret_Converter_for.html?sts=pi&pim=Y.

Q: 10. What is the optimal transmitter / receiver for the MKE 2 Gold ?

A: The Sennheiser EK 100 G4 receiver & Sennheiser SK 100 G4 transmitter would be the ideal compatible solutions to use with the MKE 2 Gold. You can also use the Sennheiser SK AVX Digital Bodypack Transmitter & Sennheiser AVX EKP Camera-Mount Plug-In Receiver with the Sennheiser MKE 2 Gold.