The cocoa Countryman E6 Omnidirectional Earset Mic for Lectrosonicsis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work for the new Canon EOS R?

A: Yes, the Canon DC Coupler DR-E6, does work with the New Canon EOS R.

Q: 2. I found this by following a link to:Canon AC Adapter Kit ACK-E6B&H # CAACKE6 MFR # 3351B002 It is considerably cheaper, so how is the other one better? I am looking to find a way to keep a charge during a multi-day time lapse.

A: The Canon AC Adapter Kit ACK-E6 includes the Canon DC Coupler DR-E6. If you need to power your camera with AC, then you need the kit. If you already have the part that plugs in to the wall and just need to replace the coupler (replaces your camera battery and plugs in to the brick that goes to the wall outlet), then you just need the coupler.

Q: 3. Will this pouch fit a Sony cube transmitter DWT-P01N?

A: No it will not.

Q: 4. Does it works for Canon 5D mark3? Does it has decoding chip inside?

A: There is no decoding chip in this battery adapter. However, we must admit not knowing of any such chip in any such adapter. So that we may be of further assistance with your question, please email us at provideo (at) bhphoto dot com.

Q: 5. Can anyone recommend a device so I can attach this DC coupler to a V-Mount battery source?

A: You could use a v-mount battery plate like this from SmallRig: https://www.bhphotovideo.com/c/product/1643740-REG/smallrig_3203_v_mount_battery_adapter_plate.html

Q: 6. Will this frequency (A1: 470.100-537.575 MHz) still be legal after FCC's spectrum auction is all done? Does this frequency require license to operate?

A: Yes! The remaining TV band will be 470-612MHZ. You can use these frequencies without a license subject to the new rules governing Un-licensed devices. If you are an un-licensed user I suggest reading the FCC document that explains what you are up a against. It's a bit too much to explain in this particular forum.

Q: 7. Will this coupler work with the AC adapter (brick) that comes as part of the Canon ACK-E4 AC Adapter Kit (for 1D3, 4, and X)? I already have several of those, so would like to just add the coupler (to fit a 5ds) rather than buy the whole ACK-E6 kit.

A: No, it will not work with the ACK-E4 AC adapter.

Q: 8. For the 5D Mark III, I found the battery door needs to close for the camera to turn on. How have you used the coupler with the battery door since there is no space for the coupler wire to close the door? Or have you taken off the door, in which case, how did you depress the trigger so that it would recognize the power source and turn on.

A: There is a tiny rubber slot in the front of the camera (on the grip, where the end of your pinky finger sits) that opens up, allowing the dummy battery cable to run out.

Q: 9. can this pouch fit a UH200 ?

A: The Lectrosonics UH200 plug on transmitter's dimensions are: 3.1 x 2.4 x .75 inchesAn HM series transmitter is: 4.25 x 1.62 x 1.38 (10.8 x 4.1 x 3.5 cm) So this leather case is not compatible with a UH200.

Q: 10. What size is the barrel connector, 2.1 x 5.5mm?

A: Yes, the barrel connector of the LanParte E6 Battery Dummy Pack (B&H# LAE6P01) has a 2.1mm center pin and can accommodate a barrel connector that has an outer diameter of 5.5mm.