The light beige Countryman E6 Omnidirectional Earset Mic for Azden Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I do not see a hole for the power cord on the 5D Mk IV - guessing I need to a slight door modification?

A: The opening for the power cord on the Canon EOS 5D Mark IV DSLR Camera is covered by a rubber flap on the edge of the battery door (located on the inner side of the camera grip).

Q: 2. Does this have a voltage regulator in it? I want to plug it into an Arri Alexa 3 pin which outputs 24-27v. IOW can I use a higher Voltage battery as the source such as a V-Lock (14.4v)

A: This dummy battery does not have a regulator. If you'd like to use A mount or V mount battery for continuous powering, please use it with LanParte Battery Pinch. The Battery Pinch is voltage regulated and offers several powering jacks with different voltage outputs for different gears.Please check out LanParte VBP-01 VBP-02 VBP-03(for V-Mount) or ABP-01(A-Mount)

Q: 3. Does this work with the CANON 6DMKII?

A: The Canon 6D Mark II uses the LP-E6 Battery System. This dummy battery should work well with that camera.

Q: 4. How long is the cord?

A: The EX503L features a 1.3 meter cable (4.26 feet).

Q: 5. Does it work wit the canon R7? I have one of these and ideally wouldnt want to buy a new one for the r7

A: Yes this will work with the Canon R7.

Q: 6. We purchased this microphone and now need batteries. Must we use the Azden rechargeable batteries or will any NIMH rechargeable battery work?

A: Only the Azden batteries (1HR-3U) will charge while inside the IRH-15C. Using another brand of rechargeable batteries will work but will have to be charged outside of the unit. Alternatively, any brand of one-time-use alkaline batteries may be used.

Q: 7. Will this SWS-30 windshield also fit the Azden SMX-30V model?

A: Yes, the Azden SWS-30 Furry Windshield Cover will fit the Azden SMX-30V Stereo/Mono Mixable Video Microphone.

Q: 8. Will this work with a Cannon Rebel T7i?

A: Hello. The mic would only come through in the left channel since you'd be plugging a MONO mic into a STEREO input. To have this wire direct into the camera, your best option would be to get a 3.5mm mono to mono cable extension and a 3.5mm mono to stereo adapter.

Q: 9. Will this battery work with my BMPCC 6k?

A: Yes, it will.

Q: 10. Thanks for answering previous question. At Azden I see Azden EX-503 | Azden EX-503L | Azden EX-503H. I dint understand the potential difference among them in terms of sound quality. How to choose among these three.I want you use it for interview and documentary work with zoom H1, which one should i look for? How is the ambient sound cancellation?

A: My 14 yo has been using this item for interviews and is very happy. He has used it for school, small buisness, and religious events. There is some ambient noise when background noise is high but for routine interviews and recording speeches it works well. Value for cost is good.