The light beige Countryman E6i Omnidirectional Earset Mic for Sky Wirelessis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. My ceilings are 19 feet high. There are times when I need the light pretty close to the ground (babies). How can I get pantographs that extend much longer? I'm not really interested in mounting the rail system lower with extensions, I think that will look really messy.

A: Unfortunately, the kits only include the standard pantographs. However, the Manfrotto Pantograph - Extra Long, BH # MAFF3514N86 can be purchased separately as well as the other components in this kit. https://bhpho.to/3qWD71H

Q: 2. Which power adaptor(s) will work with this mount (correct plug & power). Thanks

A: Any 12v P4 plug (5.5mm x 2.1mm) connected to 12v batteries ( advised range is 9v -13v ) such as acid batteries, li-Po powerbanks and power supplies.

Q: 3. Can I add more pantographs to this system if I want to? Additional lights and or a mic?

A: You can add more pantographs to this system, but that will prevent full movement of the pantographs that are already installed.

Q: 4. Can I use this mount with Orion MAK 127, Orion Apex 127mm Maksutov-Cassegrain Telescope , it weighs 9 pounds

A: Yes as long as the OTA has a Vixen Style Mount, which I assume so. The Mount has an 11-pound Payload Capacity, so weight will work for that OTA.

Q: 5. Does the 20201 fit/work with any other skywatcher telescope (like the 72ED)?

A: According to the manufacture it is only designed for the PRO 100 ED APO

Q: 6. Would an 8-foot ceiling be too low since these will hang a minimum of 1'6"?

A: Yes it would be best if the ceiling is beyond 8 feet.

Q: 7. What accessories do I need to mount my camera to the Sky-Watcher AZ-GTi GoTo AZ Mount?

A: az-GTi carries a Vixen dovetail. So any option that connects to the saddle and provides a 1/4 bolt can be used. there is many options like L-Brackets, or dovetail and 1/4 bolts, you can attach a ballhead on a dovetail. Just remember to balance the mount. Star Adventure or Eq3 counterweights are recommended.

Q: 8. The ceiling in my studio is 11.5 feet. Is that too high for this system?

A: Hi Barry, No, your ceiling is not too high. Each pantograph supports a load of up to 26lbs suspended from 1' 6" (minimum lenght) to 6' 6" (maximum length.)

Q: 9. For nikon D90 camera which adapters i need for celestron sct edge hd 11 “?

A: You would need the above Sky Watcher M48 adapter plus this Celestron adapter: https://bhpho.to/35JdTue

Q: 10. What's the difference between the Economy and the Standard versions?

A: The Sky-Watcher AZ-GTi GoTo AZ Mount BH #SKS21110 • MFR #S21110 (standard) has built-in GPS. The economy does not