The light beige Countryman E6 Omnidirectional Earset Mic for Micron Wirelessis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How long, on average, do these batteries last in the BMPCC 4K?

A: Approximately 60 minutes.

Q: 2. Hello, I have a micro-battery LP-E6 that I bought for use with my BMCC4k, when I put it in my canon battery charger LC-E6, the light flashes without stopping and it seems that it does not charge the battery at all, do you know that it may be happening?

A: consider this charger , Watson Compact AC/DC Charger for LP-E6 & LP-E6N Battery B&H # WACCNLPE6

Q: 3. what do I need to conect this to a 240volt AC power source?

A: This E6 Battery Dummy Pack is meant to be used with a large battery by Laparte. In order to be used with a 220VAC system, you need the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras. Please note: you will need an adapter plug for the cord and this item is currently on back order and there is a shipping delay of 7-14 business days.

Q: 4. I do not see a hole for the power cord on the 5D Mk IV - guessing I need to a slight door modification?

A: The opening for the power cord on the Canon EOS 5D Mark IV DSLR Camera is covered by a rubber flap on the edge of the battery door (located on the inner side of the camera grip).

Q: 5. For the 5D Mark III, I found the battery door needs to close for the camera to turn on. How have you used the coupler with the battery door since there is no space for the coupler wire to close the door? Or have you taken off the door, in which case, how did you depress the trigger so that it would recognize the power source and turn on.

A: There is a tiny rubber slot in the front of the camera (on the grip, where the end of your pinky finger sits) that opens up, allowing the dummy battery cable to run out.

Q: 6. Does this work with the CANON 6DMKII?

A: The Canon 6D Mark II uses the LP-E6 Battery System. This dummy battery should work well with that camera.

Q: 7. What else do you need to make this work for a power source on a Canon 60d?

A: You will need the Canon AC-E6N adapter. Click the link below to view; https://bhpho.to/3imalUo

Q: 8. Will this coupler work with the AC adapter (brick) that comes as part of the Canon ACK-E4 AC Adapter Kit (for 1D3, 4, and X)? I already have several of those, so would like to just add the coupler (to fit a 5ds) rather than buy the whole ACK-E6 kit.

A: No, it will not work with the ACK-E4 AC adapter.

Q: 9. Hello! Does this fit the Zacuto EVF Pro? (ZAZFINDEEVFP)

A: Yes. Also bought one for the camera body and hooked it up to Anton Bauer battery mount. Works great.

Q: 10. Is this memory compatible with Lenovo Thinkstation P8 with AMD threadripper pro storm peak series?

A: Yes, this Micron SSD 64GB Micron DDR5 4800 MHz RDIMM Memory Module (1 x 64GB) is compatible with the Lenovo Thinkstation P8 with the AMD Storm Peak Threadripper PRO processor.