The light beige Countryman E6 Omnidirectional Earset Mic, Medium Gain, Light Beigeis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the size between the velcro strips? Thank you!

A: The medium divider is 6 1/4 x 4 1/2 inches.

Q: 2. Is this compatible with the Lightbridge C wheels mounting hardware?

A: According to the manufacturer, the Godox KNOWLED LiteFlow 50 Reflector Kit (20 x 20") should fit items like the LightBridge C-Wheel 2.0 Male Spigot, B&H # LICRLSG2CSV2. Note that Godox says it should fit, but they are not 100 percent sure.

Q: 3. Are these straps machine-washable? Or do they require a special procedure to be cleaned?

A: It is recommended that the Viviana Medium Wireless Transmitter Waist Strap be cleaned by hand as opposed to machine washing.

Q: 4. What are the interior dimensions?

A: The Impact Light Kit Roller Bag #2 dimensions are: Interior: 39 × 13 × 9.5 in. (99.1 × 33 × 24 cm) Exterior: 41.75 × 15 × 11 in. (106 × 38 × 28 cm)

Q: 5. Will I have quality drop by plugging the 3.5mm variant of this mic into a Zoom H6 using a 3.5mm to XLR adapter?

A: The quality should be fine as long as the proper adapter is used. We recommend this adapter for your application: https://www.bhphotovideo.com/c/product/327244-REG/Ambient_Recording_EMP35_P48_Electret_Converter_for.html?sts=pi&pim=Y.

Q: 6. How many light stands can the case hold if you have three Aputure 300C lights?

A: The Impact Light Kit Roller Bag #2 (Medium, Black) BH #IMLKBR2V3 is not large enough for three Aputure 300c and stands.

Q: 7. Would a tripod 40" long be able to fit?

A: The Interior is 39" long 1 " to short.

Q: 8. I have the GVM 800D 3-Video Light Kit and want to get a new carrying case. Can this bag be configured to safely for that set?

A: Yes, the Impact Light Kit Roller Bag #2 (Medium, Black) is large enough to fit the GVM 800D-RGB LED Light Panel (3-Light Kit). Note, you will not be able to use the partitions as the lights are too large for those.

Q: 9. What length and size stands can this bag hold?

A: The interior dimensions of the PortaBrace LP-B3 Light Pack Case, Medium (Black) are listed as 10 x 6 x 37 inches (25.4 x 15.2 x 94 cm). As such, your light stand should be approximately 36 inches (91.44 cm) or shorter to fit inside the above case.

Q: 10. Are there 2 side pockets, one for a tripod and one for water bottle?

A: You can put a tripod in one side pocket and have a water bottle in the other with the Manfrotto Pro Light Backloader 16L.