The cocoa Countryman E6 Directional Earset Mic, Medium Gain, 2mm Cable, 6-Pin Hiroseis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I’m powering my 702 sound device Need 4pin Hirose x 5.5x2.5

A: This cable is meant for a Lectrosonics system. The cabling you require is dependent on what power source you are coming from. If using a BDS distribution system, here is a cable you could use: https://www.bhphotovideo.com/c/product/283346-REG/Remote_Audio_BDSCSQN_CSQN_BDS_Power_Output.html/specs If from a different power source, I would recommend calling in and speaking with a sales representative for the proper cabling.

Q: 2. I have a RED DSMC2 with Tilta's C1 cage, which has a 7 pin connector with "Motor" written on top of it. If I plug this cable into the MOTOR connector on my cage, will it provide power and camera control (REC start/stop) ?

A: No this will not work for Run stop controll of the camera this is used to connect a Nucleus-M 7-Pin Motor to Motor Cable from Tilta to connect one Nucleus-M lens control motor to another.

Q: 3. Mixpre 6 ii -- MX-Hirose -- Tilta NP-F Base Battery Plate , For this setup, Which power option shall i choose? 7.2v or 12V ( from Tilta Base Plate

A: The Sound Devices MX-HIROSE Hirose DC Input Sled for MixPre, MixPre-M & MixPre-II Mixer-Recorders needs 10-20 volts, so 12v would be appropriate for this situation.

Q: 4. Does this work with the Marshall CV505-MP? I presume so but odd it's the only model not listed.

A: Yes, the Marshall Electronics 12-Pin Hirose Breakout Cable for Select POV Broadcast Cameras (10'), B&H # MACVBSE10FT, will work with the Marshall CV505-MP.

Q: 5. Will this work with any battery pack with a 45w or more PD port on a R5? Or does it have to be a ZILR battery or Anker?

A: The ZILR USB-C to Canon LP-E6 Dummy Battery Cable could be used with any charger or battery that supports USB-C PD power output.

Q: 6. When I plug my Hirose cable into one of the ports with the power turned on, the green light goes out. Is the device I'm trying to power (a Lumos 100MK) not compatible?

A: Unfortunately they are not compatible. The Lumos 100MK is a lighting product. The ABPAK External Power is for Pro Audio devices with 4 pin Hirose connectors.

Q: 7. Will this item work with the Cable Techniques MX-POWERSLED for Sound Devices MixPre?

A: Yes, the Deity Microphones SPD-HRISO 4-Pin Hirose Inline Power Isolator Cable can work with the Cable Techniques MX-POWERSLED for Sound Devices MixPre. It can be placed between any Hirose 4 pin battery or power distribution, and the sled or device to be powered, for ground isolation.

Q: 8. What power sources can this be connected to?

A: This device is compatible with NP-1 battery cups for NP-1 type batteries.

Q: 9. How long is the cable?

A: The Deity Microphones SPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Barrel Jack Cable is 19.7" (50 cm) long.

Q: 10. does the battery door close so the camera will turn on?

A: It would depend on your camera model; however there are many camera models that are built so that the cable of the ZILR USB-C to Canon LP-E6 Dummy Battery Cable would be able to fit with the battery door closed. I would recommend checking the battery door of your chosen camera to verify if there is a channel for dummy battery cables built in.