The light beige Countryman E6i Omnidirectional Earset Mic for Zaxcom Transmittersis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work on a dji mic kit?

A: The SmallRig Telescoping Interview Handgrip for Rode Wireless GO is designed to use with the Rode Wireless GO transmitter. It is also compatible with Lavalier microphones with cold shoe, such as SmallRig W60, RODE Wireless Go, DJI Mic, Hollyland Lark 150, Synco G1/A2. The DJI Mic kit does not have a cold shoe and will not be compatible.

Q: 2. Everybody is asking will this work with but I gotta know. Can I use this with a RodeLink wireless system? I screwed up the included Lav, and I need to get a replacement quick until I can repair the one that came with. I know it's got a TRS connector, and the price is amazing, but I've got to be sure

A: This has not been tested with a RodeLink system at all. The transmitter requires:Input Connection Type: 3.5 mm TRS jack socket (with thread lock) The Polsen mic does not offer this connector and it is battery powered. The RodeLink transmitter supplies power to the microphone.Use this mic: Rode Lavalier Microphone B&H # ROLAV and the appropriate connector: Rode MiCon 1 Connector for Rode MiCon Microphones (Sennheiser)B&H # ROMICON1

Q: 3. Is this mic compatible with a Sony Prosumer HDR-CX900 camera?

A: Yes it is. Plug and play.

Q: 4. I'm getting a SD Mix-pre 6 ii, should I get this bag (OR-28) or the (OR-27). They seem so similar other that this one being a little wider. Is that the only difference?

A: The Mixpre-6 II will fit in both the OR-28 and OR-27. The two Orca bags are very similar in design but differ in their width and height. Dimensions of the Mixpre-6 II are 6.5 x 1.4 x 4.6" (166 x 36 x 118mm). The interior of the OR-28 is 8.5 x 4.5 x 6.5" (215 x 115 x 165mm) and the smaller OR-27 is 8.5 x 3.5 x 5.1" (215 x 90 x 130mm), The interior of the OR-28 is 0.98" (25mm) wider and 1.38" (35mm) taller than the interior of the OR-27.

Q: 5. Will the TascM DR-680MKII FIT IN THIS BAG?

A: Its a little short on the depth.

Q: 6. will this work with the Hollyland 150 receiver ?

A: The RODE Lavalier II Omnidirectional Lavalier Microphone would not be recommended for use with the Hollyland LARK 150 2-Person Compact Digital Wireless Microphone System (B&H # HOLARK150). A microphone with a non-locking 3.5mm connector, such as B&H #ROLAVGO, would be recommended instead.

Q: 7. If I use two OLM-10 microphones connected to a single camcorder via a Y connector, will there be any feedback issues? I know that purchasing one OLM-20 will not result in feedback, but I would prefer to purchase two OLM-10 microphones if there is no feedback issues. Thanks!

A: Using a Y connection is NOT recommended. The results will probably result in an audio track that is very distorted or over-modulated. Use a small mixer: The Azden CAM-3 3-Channel Mic Mixer allows you to add and mix sound from three Azden wireless or hard wired microphone sources simultaneously.Input Connections: -------------------------Input 1 and 2: 3.5mm MonoInput 3: 3.5mm Stereo ------------------------Output Connectors: 1 x 3.5mm stereo

Q: 8. We cannot get this to work on our Mac laptop. They can hear us but we can't hear them once it's plugged in...?

A: Eject the USB microphone from the computer desktop. Unplug it from the computer, Shut down the computer and then restart it after 30 seconds or so. Then plug the micrphone back in. If this does not provide remedy, please contact our Customer Service department: 800.221.5743 cs@bhphotovideo.com

Q: 9. What software--if any--do I need to record meeting audio using the microphone?

A: In order to record audio using the CAD U7 Boundary mic, you will need an audio recording software. There are many free software downloads available. We recommend Audacity which is both Mac and PC compatible, and will allow you to record, edit and export your audio files. Available free at a href= http://audacity.sourceforge.net/ target= _blank http://audacity.sourceforge.net//a

Q: 10. Can this lavalier be used with the RodeLink systems?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone is compatible for use with the RodeLink wireless microphone transmitters.