The light beige Countryman E6 Omnidirectional Earset Mic for Azden Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this battery work with a Z Cam E2C?

A: Yes, The Zcam E2C camera works with Canon style LP-E6 batteries. The Blackmagic Design LP-E6 Battery will work with the Zcam E2C.

Q: 2. Can I use this to power a small HD 502 bright in to a 12 volt port?

A: the monitor is powered by the LP-E6 battery. There are several manufacturers of the dc couplers

Q: 3. Does this dummy battery work well on blackmagic pocket cinema 4k?

A: This battery coupler will fit in the Blackmagic Design Pocket Cinema Camera 4K. With the correct power, it should work as expected.

Q: 4. Does it work wit the canon R7? I have one of these and ideally wouldnt want to buy a new one for the r7

A: Yes this will work with the Canon R7.

Q: 5. I found this by following a link to:Canon AC Adapter Kit ACK-E6B&H # CAACKE6 MFR # 3351B002 It is considerably cheaper, so how is the other one better? I am looking to find a way to keep a charge during a multi-day time lapse.

A: The Canon AC Adapter Kit ACK-E6 includes the Canon DC Coupler DR-E6. If you need to power your camera with AC, then you need the kit. If you already have the part that plugs in to the wall and just need to replace the coupler (replaces your camera battery and plugs in to the brick that goes to the wall outlet), then you just need the coupler.

Q: 6. Will this battery work with my BMPCC 6k?

A: Yes, it will.

Q: 7. what do I need to conect this to a 240volt AC power source?

A: This E6 Battery Dummy Pack is meant to be used with a large battery by Laparte. In order to be used with a 220VAC system, you need the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras. Please note: you will need an adapter plug for the cord and this item is currently on back order and there is a shipping delay of 7-14 business days.

Q: 8. How does the Azden 3500 do outside in high temps and humidity?

A: The Azden SGM-3500 Broadcast Shotgun Microphone is not IP-rated for water resistance, and Azden has not published specs on its maximum operational temperature. As such, it should be treated with care and kept away from moisture and extreme temperatures.

Q: 9. Compatible with Canon EOS R?

A: Hi, yes, this is compatible with the EOS R.

Q: 10. Does this work with the CANON 6DMKII?

A: The Canon 6D Mark II uses the LP-E6 Battery System. This dummy battery should work well with that camera.