The light beige Countryman E6 Directional Earset Mic for Comtek Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it works for Canon 5D mark3? Does it has decoding chip inside?

A: There is no decoding chip in this battery adapter. However, we must admit not knowing of any such chip in any such adapter. So that we may be of further assistance with your question, please email us at provideo (at) bhphoto dot com.

Q: 2. How is it best to clean ear buds when there are multiple users? My church won't provide the ear pieces so I bring my own.

A: You can clean your earbuds with a damp cloth and a small amount of mild soap, like a drop of dish soap. A toothbrush can be used to gently remove any wax that may be built up. There are also cleaning products available like HygenX by HamiltonBuhl (B&H # HAX19HRSB), which is specifically for cleaning headphone and earbuds.

Q: 3. Does this work with the CANON 6DMKII?

A: The Canon 6D Mark II uses the LP-E6 Battery System. This dummy battery should work well with that camera.

Q: 4. Does this receiver work with the older Comtek BST-25 transmitters?

A: No it is not compatible. The PR-216 is the compatible receiver for the BST-25 The PR-216 and the BST-25 are available in two frequency bands, 76-88 MHz and 216-217 MHz. In order for the PR-216 to work with the BST-25, they both need to be on the same frequency. Here are the item numbers: #COPR216 (216-217 MHz) # COPR216TV56 (76-88 MHz)

Q: 5. what do I need to conect this to a 240volt AC power source?

A: This E6 Battery Dummy Pack is meant to be used with a large battery by Laparte. In order to be used with a 220VAC system, you need the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras. Please note: you will need an adapter plug for the cord and this item is currently on back order and there is a shipping delay of 7-14 business days.

Q: 6. I found this by following a link to:Canon AC Adapter Kit ACK-E6B&H # CAACKE6 MFR # 3351B002 It is considerably cheaper, so how is the other one better? I am looking to find a way to keep a charge during a multi-day time lapse.

A: The Canon AC Adapter Kit ACK-E6 includes the Canon DC Coupler DR-E6. If you need to power your camera with AC, then you need the kit. If you already have the part that plugs in to the wall and just need to replace the coupler (replaces your camera battery and plugs in to the brick that goes to the wall outlet), then you just need the coupler.

Q: 7. Is this unit blue tooth compatible?

A: This receiver operates on the 72 to 76 MHz radio frequencies. It is not a Bluetooth device.

Q: 8. Will this battery work for my BMPCC 4K w/o a grip. I'm having trouble finding just the batteries for the camera. Hopefully this is the one !

A: Yes, Blackmagic Design Pocket Cinema Camera 4K takes any version of the LP-E6 batteries. Blackmagic Design LP-E6 Battery is a replica of the Canon original LP-E6 lithium pack therefore is fully compatible with camera.

Q: 9. What is the typical range with clear line of sight?

A: The Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver (72 to 76 MHz) will give you a range of up to around 100-feet in the most ideal conditions.

Q: 10. Hello, I have a micro-battery LP-E6 that I bought for use with my BMCC4k, when I put it in my canon battery charger LC-E6, the light flashes without stopping and it seems that it does not charge the battery at all, do you know that it may be happening?

A: consider this charger , Watson Compact AC/DC Charger for LP-E6 & LP-E6N Battery B&H # WACCNLPE6