Aiphone Ps-1208Ul 12Vdc Power Supply

Aiphone Ps-1208ul 12vdc Power Supply

Product Code: eq77119
Availability: In Stock

$299.85 $377.81

Qty

9 reviews Write a review

Description
Reviews (9)

Designed for indoor use, the Aiphone PS-1208UL 12VDC Power Supplyis a 12 VDC power supply compatible with select Aiphone PS-1208UL 12VDC Power Supplyintercom systems.

For Select Aiphone Intercom Systems 12 VDC, 0.8A Power Output UL/CSA Certified Indoor Use Screw Terminals

Parameters
Quantity	1
General
Compatibility	Aiphone Intercom Systems
Power
Power Source	AC Adapter with Power Brick
Power I/O	Not Specified by Manufacturer
Center Tip Polarity	Not Specified by Manufacturer
AC Input Power	100 to 240 VAC, 50 / 60 Hz
Power Consumption	33 VA (Maximum)
Maximum Power Output	12 VDC / 0.8 A
Environmental
Certifications	CSA, UL, CE, FCC
Operating Temperature	32 to 104°F / 0 to 40°C
Physical
Color	Black
Dimensions	6.6 x 3.6 x 2" / 167.6 x 91.4 x 50.8 mm
Packaging Info
Package Weight	1.22 lb
Box Dimensions (LxWxH)	7.9 x 6.6 x 2.9"

LEF Series without BG-10C

TD-H/B Series

RY-IP44

TL-2000

Related Questions and Answers

Q: 1. Would this work with a sony PMW F3?

A: Yes, the Core SWX SPU-4 Compact Power Supply would work with the Sony PMW-F3L.

Q: 2. Does it work with the CamRanger MP-360 Tripod Head?

A: Yes, the Bescor PS-260 AC Power Supply for MP-101 Motorized Pan Head B&H # BEPS260 will owrk with the CamRanger MP-360 Motorized Pan/Tilt Tripod Head B&H # CA1008.

Q: 3. The part number suggests this power supply might accept up to 260 volts AC.If so it would be suitable many countries that use 240 volts AC.?

A: I would think it will work at 240 volts. When it says input 100-240 that usually means that is an international power supply.

Q: 4. Hi, will this work with Atomos Sumo 19?

A: Yes it will. This will work with the Atomos Sumo 19.

Q: 5. Does this come with the belt clip as well?

A: It does, they are awesome !

Q: 6. Is this 15 amp or 20 amp rated?

A: The ART PS 4x4 can handle up to a 15A load.

Q: 7. What are the plug's dimensions: barrel diameter, etc...?

A: It looks like a standard wall Wart found wih most electronics. Not sure of your question about barrel diameter, it is a rectangular device. I know that it is too wide to allow 2 of them to be plugged into an outlet strip

Q: 8. Can the PS - 1A work with an Li-polymer 9V like Ipowerus instead of an Alkaline 9V ?

A: Thank you for your question. This unit will only work properly with a Alkaline or NiMH battery,.

Q: 9. where do i find the installation instructions?

A: The installation manual can be found at the following link: http://bit.ly/1kFmsgG

Q: 10. work with lorex cameras?

A: This power supply works with most analog cameras that require 12v dc power.

anyonymous	16/09/2024
[1.22 lb] purchased another camera for by system...added 12vdc power supply.... excellent service...will buy from B&H again 5

Jerome	04/09/2024
[12 VDC / 0.8 A] I needed a power supply for a musical-instrument device that I bought used. This power supply met all the technical requirements (and its price was much lower than elsewhere), except that its plug had an incorrect center-pin diameter (I wish the listings for such devices included that spec; they seldom do). Luckily I had a power supply with the right plug that I don't need; I spliced that power supply's cable onto this one since I have the necessary tools and skills. It's now doing the job! 5

anyonymous	22/08/2024
[12 VDC / 0.8 A] This power supply is great, lasts well, and is durable. Extremely no noise makes the mkh 416t. I bought It for sound like a dream. Retains the softness of the vintage microphone. My one qualm is that for some reason. The only way to turn the on-off switch involves screwing off one of the plates and taking it apart a little bit, but you really only have to do that once... Then you can just take out the battery! 5

anyonymous	08/08/2024
[1] I used the supply to power 2 G4 style LED under counter lamps. They are 12-volt LEDs that I wired in parallel and each use 240mA so the 500mA rating of this PS was perfect. 5

Gary	19/07/2024
[12 VDC / 0.8 A] This was a direct replacement for one that was 5 years old and didn't survive a bad thunderstorm. Install took no time at all and now it's out of sight, out of mind - the way it should be. Delivery was very quick as well so our downtime was ultimately not bad at all. 5

Ian	12/07/2024
[1] Has a semi-loud fan in the front. Does typical intercom stuff and has the rock solid performance you'd expect from RTS including the ability to do 2 channels of clearcom. 5

John M	21/05/2024
[1.22 lb] Like most RDL products, this unit was first class. After a tough life on the road with bad power, surges, shorts, and overloads it rocked on and always protected the audio DA it powered. 5