The light beige Countryman E6 Omnidirectional Earset Mic, Medium Gain, 2mm Cable, Hirose Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this convert the 20 pin out of the Canon ZSG-C10 Zoom Controller to BlackMagic 12 Pin Lens Control?

A: No, the Chrosziel Canon 20-Pin Hirose to Fujinon 12-Pin Adapter Cable for Servo Zoom Control (B&H# CHCABC20F12Z) is designed to be used with a Canon servo lens only. Among the issues would be a lack of power to the Blackmagic Design controller.

Q: 2. What power sources can this be connected to?

A: This device is compatible with NP-1 battery cups for NP-1 type batteries.

Q: 3. Will this item work with the Cable Techniques MX-POWERSLED for Sound Devices MixPre?

A: Yes, the Deity Microphones SPD-HRISO 4-Pin Hirose Inline Power Isolator Cable can work with the Cable Techniques MX-POWERSLED for Sound Devices MixPre. It can be placed between any Hirose 4 pin battery or power distribution, and the sled or device to be powered, for ground isolation.

Q: 4. How do you remove the input sled?

A: Hi Mikala. One simply needs to pull it away from the back of the unit at the right side of the mixer, near the letter "M" of "MixPre" printed on the top rear panel of the chassis.

Q: 5. is this regulated? hate to fry my monitor

A: Yes, this cable is voltage regulated.

Q: 6. Can this fully power a Canon R5C when filming in 8k/60fps?

A: The IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable (30") (B&H# INPTLPD) may be used to replace the functionality of an LP-E6, LP-E6N, or LP-E6NH battery. It is regulated to provide the requisite 7.2VDC at up to 2A. That is sufficient to equal the functionality of that battery. Users of the Canon EOS R5 C Mirrorless Cinema Camera (B&H # CAER5C) should keep in mind that it will not provide the higher voltage and wattage of the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) that is required for full electronic lens control at frame rates above 30p in 8K, above 30p in 5.9K, or above 60p in 2.9K modes.

Q: 7. Will the barrel cable fit a powerbase edge 14.8 v ? I bought another one of these from somewhere else and the barrel end didn't fit the powerbase.

A: This adapter will work with SWX Powerbase EDGE batteries. We also have a kit with battery charger and the adapter https://bhpho.to/3pmZayX

Q: 8. will it work with Canon R6 II?

A: Yes, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable would work with the Canon R6 II camera.

Q: 9. will this work on Blackmagic Studio cam for adaptor from MFT to B4 lens ?

A: This adapter is designed to work with the size sensor in the pocket camera. It work well on BMPC and well designed and sturdy.

Q: 10. Is this an extension cable? What is the pin configuration on each end? I'm looking for a 4 pin male 90 degree end to straight female end to extend AC power supply from Sound devices so I don't have to open mixer bag to power up. THX

A: Although a pin configuration is not available, we can confirm that the Film Devices Hirose Straight to Hirose 90º Power Cable is used for power distribution scenarios and has a male 4-pin Hirose connection on each end. This cable would not work to extend a power cable also terminating in 4-pin Hirose male.