The light beige Countryman E6 Omnidirectional Earset Mic for Vega Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this be used to power the Sony FX30 via USB-C? Card slots are for computer/tablet?

A: The upio Tri-Charge for Sony NP-FZ100 may able to power the Sony FX30 Digital Cinema Camera (B&H # SOFX30), though it is not a setup that is usually tested. The slots are for SD, microSD, and CFexpress memory cards.

Q: 2. Will this support the newer Canon LP-E6P batteries introduced with the R5 Mark II?

A: Yes. The chargers for the LP-E6P batteries are the same as the current chargers for the LP-E6 and LP-E6NH batteries. So the Jupio Tri-Charge for Canon LP-E6 is compatible.

Q: 3. Does this dummy battery work well on blackmagic pocket cinema 4k?

A: This battery coupler will fit in the Blackmagic Design Pocket Cinema Camera 4K. With the correct power, it should work as expected.

Q: 4. Will this battery work with my BMPCC 6k?

A: Yes, it will.

Q: 5. Does it work wit the canon R7? I have one of these and ideally wouldnt want to buy a new one for the r7

A: Yes this will work with the Canon R7.

Q: 6. Compatible with Canon EOS R?

A: Hi, yes, this is compatible with the EOS R.

Q: 7. Hi - just rec'd a crane 2 for use with a canon 70D - can this coupler use/plug in to the power from the Crane 2 batteries to power the camera?

A: Yes. you'll need the DR-E6 , B&H # CADRE6 . see illustration in Zhiyun manual below, page 22. https://static.bhphotovideo.com/lit_files/371635.pdf

Q: 8. Would this work to power the Blackmagic pcc4K? It uses the same E6 batteries that my 5D does. I want to plug in the Blackmagic to the DC output on my Zhiyun Crane 2. Thanks

A: It will not. While this does have the proper LP-E6 style dummy battery for the Pocket Cinema Camera 4K it is not compatible with the Crane 2.

Q: 9. Will the work for Canon EOS 90D? Thanks

A: Yes, the 90D uses LP-E6 style batteries as well.

Q: 10. Is it safe to store batteries in this charger without worrying about self discharge?

A: While it is safe to leave lithium batteries on a charger like the Jupio Tri-Charge for Sony NP-FZ100, the batteries will eventually degrade if charged to 100% for too long without discharging them.