The light beige Countryman E6 Directional Earset Mic for Azden Wireless Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Azden UHF 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. how do I mount a WR-Pro wireless receiver on a Sony HDR-CX430V video camera?

A: Unfortunately that camera has a hot shoe on it. So you have nothing on the camera to attach a cold shoe to. But you can circumvent this minor problem with a Vello CB-510 Dual Shoe Bracket. This bracket will screw into the bottom of the camera where you would normally attach the camera to a tripod. Instead you will screw the Vello bracket onto the camera. This device will now give you 2 cold shoe mounts that are part of the bracket and a rubber coated handle that you can now use to hold onto your camera. The Azden receiver should have a shoe that came with it that attaches to the back of the receiver. All you have to do is slide the shoe mount on the receiver onto one of the shoes on the Vello bracket. Then plug the output of the receiver 3.5mm plug into the camera. Here is the B&H part number for the Vello bracket. B&H# VECB510

Q: 2. Hello. Is it possible to connect a Rode Stero Video Mic (self powered) microphone to the auxiliary input of the transmitter to transmit stereo signal? Thankyou!

A: If the Rode is capable of outputting a line level signal then it will transmit. I'm not sure whether it would be in stereo however.

Q: 3. Can I plug the receiver into a Zoom recorder? Or do I need to plug it into a camera.

A: Yes. You can connect the output from the receiver into the input of a Zoom recorder. Audio can be recorded separately on the Zoom recorder (instead of in the camera) and then sync it with the video in post production.

Q: 4. Would this work with the Canon Vixia HFG20?

A: I don't have that camera but if it has a standard mic input (according to the specs it does), then the Pro-XD system will work. I've been happy using the Pro-XD.

Q: 5. Can these be recharged while in use?

A: Yes, the Azden PRO-XR Digital Camera-Mount Wireless Omni Lavalier Microphone System can be recharged while it is in use.

Q: 6. If I were to buy 16 of these for TV production, would each one be on it's own channel?

A: Hello Peter P. Thank you for your inquiry in regards to the PRO-XD 2.4GHz Digital Wireless Lavalier System. Since this system operates in the 2.4GHz (WiFi) spectrum, it's not ideal to operate that many systems at one time. The WiFi spectrum only has 14 available channels, 11 of them available in the USA. Those 11 channels also have some frequency overlap. For TV production, you're better off using a UHF system like our 310 Series wireless, which has 188 selectable frequencies. The 310LT is a perfect solution and is also a very affordable solution. Going with UHF will allow for a higher number of kits to be used in proximity without worrying about open channels/frequencies.

Q: 7. I have a Canon Vixia camcorder. How do I mount the receiver to it?

A: It should slide right onto the top of the camera. There is a spot where a Flash would be mounted. The receiver can be mounted there as well.

Q: 8. Do the Azden Pro XD mount on the camera, or you have to buy a mount?

A: They mount right onto my dslr camera

Q: 9. Does it work good with instruments (violin)?

A: I’m not sure with instruments, it should. It’s working good with the speaker or preacher and really clean sound.

Q: 10. Is any delay while live streaming video

A: Absolutely not, there is no delay when streaming. This is an excellent product and one that I would recommend to anyone.