The tan Countryman E6i Omnidirectional Earset Mic for Lectrosonicsis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this pouch fit a Sony cube transmitter DWT-P01N?

A: No it will not.

Q: 2. I'd like to boost the range of my Lectro dualSRC (a1)Rx and (block 23) IFB Tx. Do you suggest multiple sna's ( one for each unit ) or would a splitter be optimal ?

A: Diversity receivers use 2 antennas, so for the SRc, best practice would be to use 2 for the receiver. As the SRc is not a true diversity receiver unless in ratio mode, it will not dramatically increase range in switch mode (the mode the SRc must be in to receive 2 channels). It's not recommended to use the same antenna for transmission and reception, so the IFB should be on a different antenna altogether.

Q: 3. What cable do I need to connect this in conjunction with the Sound Devices MM-1?

A: The Lectrosonics SPDR is not compatible with a Sound Devices MM-1.

Q: 4. Is it possible to use the SNA600a to boost the range of the sony uwp with sma mod?

A: In theory, yes, the Lectrosonics SNA600a Adjustable Dipole Antenna could be adapted for use with an SMA connection on a third party wireless receiver such as those from Sony's UWP line.

Q: 5. Can the Lectrosonics PCA900 Printed Circuit LPDA Antenna be used on a wireless microphone system?

A: as long as the frequencies match and you have an antenna input that will accpet a 50ohm BNC.

Q: 6. Does the output work as it is recording?

A: Yes, the Lectrosonics SPDR Stereo Portable Digital Recorder has an analog 3.5mm TRS line level output which does work while recording.

Q: 7. Would the SPDR record a stereo 24-bit / 192 kHz signal if it's fed through its AES input?

A: Yes, the Lectrosonics SPDR Stereo Portable Digital Recorder can record stereo audio at 24-bit / 192 kHz when using the AES3 digital input.

Q: 8. I ordered this but need the bezel that was not included to mount it in my camera slot. How can I get one?

A: Which camera is it?

Q: 9. Will this device allow me to attach one directional antenna together with two diversity receivers for wireless microphones ?

A: You would need two of each for two receivers. Each receiver needs two separate antennas. So you would not need a 4-way splitter to do this. Two 2-way splitters would do the job if you have 2 antennas. The part number for a 2-way splitter is ZSC24.

Q: 10. no antena in the box?

A: The Lectrosonics R400a will ship with power supply and 2 antennas.