Da-Lite Tensioned Advantage Deluxe Electrol Screen

Da-lite Tensioned Advantage Deluxe Electrol Screen

Product Code: eq7746
Availability: In Stock

$21,208.80 $26,935.18

Qty

4 reviews Write a review

Description
Reviews (4)

This Tensioned Advantage Deluxe Electrol 16:10 Wide Format Motorized Projection Screen from Da-Lite has a 72.5 x 116" viewing area with a DA-Tex flame retardant and mildew-resistant finish.

DA-Tex is a rear screen, translucent neutral gray finish with a 1.3 Gain rating and 30° (L/R) viewing angle. It is characterized by high transmission and low reflectance values. Color rendition is true and contrast is good. This finish is especially suitable for lace and grommet screens. If the finish becomes soiled, it can be cleaned with mild soap and water. Tensioning on each side of the seamless fabric assures a flat, undistorted surface that eliminates any chance of a skewed image.

One of the major advantages of this screen is that the fabric roller can either be factory installed or at your chosen location after the ceiling recessed, UL Plenum rated extruded aluminum white housing has been roughed in. The enables you to finish the initial installation but choose your screen finish at a later date.

The screen includes two motors; one for the ceiling door and one for the fabric. The interior roller features a quick reversal motor, oiled for life, with automatic thermal overload cutout, integral gears, capacitor, and an electric brake to prevent coasting when the screen is stopped at a chosen length. The built-in Low Voltage Control controls up/down and stop functions using the included 12VDC three-position switch that can be wall mounted where convenient. It can also be operated from an optional radio frequency, infrared or auxiliary transmitter.

Ceiling Recessed 137" Diagonal 16:10 Aspect Ratio Install Case First, Roller at Later Date Built-in Low Voltage Control Rear Projection

Parameters
Style	Tensioned Advantage Deluxe Electrol
Design	Motorized / Rear projection
Mount	Ceiling recessed
Finish	DA-Tex; vinyl, flame retardant and mildew-resistant
Tension Control	Tensioned
Keystone Control	No
Dimensions
Image Size	72.5 x 116.0" (184.2 x 294.6 cm)
Diagonal	137" (348.0 cm)
Format / Aspect Ratio	Wide / 16:10
Gain / Viewing Angle	1.3 / 30° (L/R)
Masking Options	None
Controls
Voltage	120VAC / 60 Hz Not more than 2.4 amp
Integrated Control	Pre-set, adjustable limit switches to automatically stop screen in the up and down positions Integrated low voltage control unit Three-position control switch
Control Options	Wireless Remote Control for LVC Radio Frequency Remote Radio Frequency Range Extender Infrared Remote Video Projector Interface Control - built-in SCB-100 RS-232 Serial Control Board - built-in NET-100 Ethernet-Serial Adapter SCB-100 RS-232 Serial Control Board - external NET-100 Ethernet-Serial Adapter
Casing
Color	White
Material	Extruded aluminum
Length	142.25" (361.3 cm)
Shipping Weight	Approx. 170.0 lb (77.1 kg)
Packaging Info
Package Weight	180 lb
Box Dimensions (LxWxH)	152 x 13 x 10"

Related Questions and Answers

Q: 1. Dear BH Photo Video, I am wondering if a Canon 400mm f2.8 L IS USM lens and a 1D X body would fit in this case. Thanks

A: Yes, the Think Tank Photo Airport Advantage Roller Sized Carry-On (Black) can handle up to a 200-400mm lens with no issues, and it can accommodate a 400mm fixed lens and body combo.

Q: 2. Is the interior color of the dark blue case also dark blue, or something else?

A: The interior of the Case Logic Advantage 14" Attaché (Dark Blue) is grey.

Q: 3. Which size of this Case Logic Advantage case would be the best fit for a 14" MacBook Pro? Would the 15.6" size be too big?

A: The Case Logic Advantage 15.6" Attaché (Dark Blue) would be a bit large for a 14" laptop. The 14" size would be more appropriate.

Q: 4. Does a Nikon D6 fit nicely? It's a bit taller in my pelican case than my previous bodies and was curious how well it would fit this case. I am in need of an airport roller that can fit overheads nicely.

A: Yes, you can accommodate your Nikon D6 DSLR Camera towards the bottom of the Think Tank Photo Airport Advantage Roller Sized Carry-On. The camera will fit precisly

Q: 5. will 2 sony a1 bodies and a 200-600mm lens and 24-105mm and charger and spare batteries fit?

A: Yes, the Think Tank Photo Airport Advantage Roller Sized Carry-On (Black) can fit two Sony a1 Mirrorless Cameras, the Sony FE 200-600mm f/5.6-6.3 G OSS Lens, the Sony FE 24-105mm f/4 G OSS Lens, and chargers and batteries.

Q: 6. Think Tank Photo 730553. Will this bag accommodate Nikon D810 with mounted 300mm F2.8?

A: I use it for exactly the same lens. A canon 1Dx+1.4x or 2x converter+a Canon300 2.8 will occupy one half of the bag. The second half I carry a second body with a canon 100-400. Both with camera mounted on the body.

Q: 7. Anyone know if you can fit two Sony A1 with 70-200mm 2.8 and 24-70mm 2.8 attached and lens hoods reversed end to end vertically?

A: Yes, you can fit two Sony A1 Mirrorless Cameras, with the Sony FE 70-200mm f/2.8 GM OSS II Lens attached to one and the Sony FE 24-70mm f/2.8 GM Lens attached to the other, in the Think Tank Photo Airport Advantage Roller.

Q: 8. Does it fit a Profoto B10 and two fuji xt4 with lenses attached?

A: Yes this case will accommodate a Profoto B10 along with two Fuji X-T4 bodies and attached lenses.

Q: 9. Will it accommodate the Tamron 150 - 600?

A: yes it will

Q: 10. Re: this review written by Jim T. on 5/23/2017 This bag is perfect for M4/3 users with a lot of gear. By Jim T VERIFIED BUYER ALL my Olympus Pro gear fits. My Advantage Roller hold Two E-M1.2's, 7-14 Pro lens, 14-40 Pro lens, 12-100 Pro Lens, 40-150 Pro lens, 300 Pro Lens, and the 1.4 teleconverter with space left over for a charger and short AC cord, four spare batteries, Remote Release, three Circular Polarizers, flash unit, and lots of space still left for cleaning and miscellaneous items..... HIGHLY RECOMMENDED. I would love to see a picture of how he packed the case (are the 2 longer lenses mounted on the camera or not). Are you able to direct this question to him?ThanksStephanie

A: I don't know Jim but I pack two camera bodies one with a 24 - 270 lens on the camera and one without a lens. I also have a 150 - 600 packed seperately and lots of other gadgets, filters, batteries, remotes, etc.

Zack	06/08/2024
[None] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

Rikilah	27/07/2024
[152 x 13 x 10"] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Andreas the squint	26/05/2024
[None] I used this screen in a small conference room and it was very simple to instal. 5

Cat5 King	05/04/2024
[Wide / 16:10] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5