Smallrig Wooden Handgrip Arri Rosette Right-Side

Smallrig Wooden Handgrip Arri Rosette Right-side

Product Code: eq77476
Availability: In Stock

$296.97 $392.00

Qty

23 reviews Write a review

Description
Reviews (23)

Contoured for a comfortable grip, the SmallRig Wooden Handgrip ARRI Rosette Right-Sidefrom SmallRig Wooden Handgrip ARRI Rosette Right-Sidemounts onto your camera rig's ARRI-standard rosette. The rosette allows the handle to rotate 360° for your desired position.

Fasten the grip's rosette component to one of several positions on the grip using the two M4 screws to adjust its vertical position and rotate the rosette itself to your preferred tilt angle. The center M6 screw may be removed for use with a rig requiring a female thread. This lightweight right-side grip is constructed with rosewood and aluminum.

For Right Side of Camera Rig ARRI-Standard Rosette with M6 Screw Adjustable Height Range, 360° Rotation Rosewood and Aluminum Construction Ergonomic Design, Removable Screw

Key Specs
Item Type	Right-Side Handgrip
Attachment Method	Attaches via Rosette
Accessory Mounting	No
Shoe Mounting	No
Rosettes	1x ARRI Rosette w/ M6 Thread
Rail Mounting	No
Parameters
Mounting
Attachment Method	Attaches via Rosette
Accessory Mounting	No
Shoe Mounting	No
Rosettes	1x ARRI Rosette w/ M6 Thread
Rail Mounting	No
General
Materials	Aluminum, Wood
Dimensions	3.9 x 3.5 x 2.8" / 99.3 x 88.4 x 70 mm
Weight	8.7 oz / 248 g
Packaging Info
Package Weight	0.73 lb
Box Dimensions (LxWxH)	5.1 x 4.4 x 3.3"

Related Questions and Answers

Q: 1. Will this start and stop recording on the Atomos Ninja V? Would it work with a Nikon Z6II?

A: The Ninja V and the Nikon Z6 II are not on the compatibility list for the SmallRig Wooden Handgrip Kit with Run/Stop.

Q: 2. Will this start and stop recording on the A7sii. ?

A: Yes, start and stop recording on the Sony Alpha a7S II Mirrorless Digital Camera (Body Only) is possible when using the USB Type-C to Multi Cable (21.7") included with the SmallRig Right-Side Wooden Handgrip Kit with ARRI Rosette & 3 x Run/Stop Trigger Cables.

Q: 3. Will this handle and cable work the Panasonic EVA1?

A: The SmallRig Right-Side Wooden Handgrip Kit with ARRI Rosette & 3 x Run/Stop Trigger Cables has not been tested and is not on the Smallrig camera compatibility list.

Q: 4. Are you still able to rotate the FX6 handgrip like you'd be able to when it's on the camera?

A: Yes, SmallRig Handgrip Rosette Adapter for Sony FX6 would allow you to have the same articulation as if you had the handle on the camera. The clamp mechanism is the same.

Q: 5. Would this also fit on an Panasonic UA-EVA1?

A: The SmallRig Handgrip Rosette Adapter for Sony FX6 is designed only for the Sony FX6 Full-Frame Cinema Camera (B&H # SOFX6).

Q: 6. With the rosette adapter attached to the handgrip, can the handgrip be attached back on to the camera w/o removing the adapter?

A: The SmallRig Handgrip Rosette Adapter for Sony FX6 would need to be removed from the grip if you need to work with the grip directly attached to the Sony FX6.

Q: 7. Will this handle work with the Z Cam E2 Series cameras?

A: Yes, the ZCAM E2 is listed as a compatible camera for the SmallRig Right-Side Wooden Handgrip Kit

Q: 8. Will this work on the Digital Bolex? There's a similar input on it.

A: I can not confirm without testing. I would say no. The listed compatible cameras for this handle are Fujifilm, Panasonic, and ZCAM.

Q: 9. Hello. Is this compatible with Panasonic GH6?

A: Yes, the SmallRig Right-Side Wooden Handgrip Kit with ARRI Rosette & 3 x Run/Stop Trigger Cables comes with an included control cable that is compatible with the Panasonic GH6.

Q: 10. Will this be compatible with the new model Sony ZV-E10 II?

A: No, the SmallRig Camera Cage with Right-Side Handgrip for Sony ZV-E10 is not compatible with the Sony ZV-E10 II Mirrorless Camera (BH #SOZVE102B), as the mark two is a little bit taller than the Sony ZV-E10 Mirrorless Camera (Black) is, so it won't fit inside this camera cage.

Adam	13/09/2024
[0.73 lb] This is by far my favorite side handle. Not only does it feel good in my hand, I like that it sticks forward a little instead of being exactly at the side of the camera cage. It's just a more comfortable way to hold it, especially at lower angles. I've bought two for both of my handheld rigs, and everyone that has used it agrees it's the best they've used. 5

Adam	13/09/2024
[0.73 lb] This is by far my favorite side handle. Not only does it feel good in my hand, I like that it sticks forward a little instead of being exactly at the side of the camera cage. It's just a more comfortable way to hold it, especially at lower angles. I've bought two for both of my handheld rigs, and everyone that has used it agrees it's the best they've used. 5

ed david	12/09/2024
[0.73 lb] I've had three of these now for a while. Solid construction. Really nice wooden feel. High quality gear from smallrig. 5

Tim Tyler	24/08/2024
[0.73 lb] Fits the URSA 12K! 5

Hondo	03/08/2024
[0.73 lb] The handle is what you'd want to hold - solid to cage, form fitting to palm and durable standard Arri Rosette construction. And the color is striking on the camera. Niceyrig has cornered the market for me on wooden handles. 5

Hondo	03/08/2024
[0.73 lb] The handle is what you'd want to hold - solid to cage, form fitting to palm and durable standard Arri Rosette construction. And the color is striking on the camera. Niceyrig has cornered the market for me on wooden handles. 5

Jake	02/08/2024
[0.73 lb] Comfortable, sturdy, good reach. 5

Jake	02/08/2024
[0.73 lb] Comfortable, sturdy, good reach. 5

Tristan	26/07/2024
[0.73 lb] Just do your research to make sure it'll fit where you need it - but we slapped it onto the left side of the Tilta FX6 cage and it completes our build very nicely. Depending on your hand shape, the grip can slightly dig into the space between your thumb and index finger, but it's a minor ergonomics complaint. Overall, it's very solidly built and works great. 5

Tristan	26/07/2024
[0.73 lb] Just do your research to make sure it'll fit where you need it - but we slapped it onto the left side of the Tilta FX6 cage and it completes our build very nicely. Depending on your hand shape, the grip can slightly dig into the space between your thumb and index finger, but it's a minor ergonomics complaint. Overall, it's very solidly built and works great. 5