The black Countryman E6i Omnidirectional Earset Mic for Comtek Transmittersis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this receiver work with the older Comtek BST-25 transmitters?

A: No it is not compatible. The PR-216 is the compatible receiver for the BST-25 The PR-216 and the BST-25 are available in two frequency bands, 76-88 MHz and 216-217 MHz. In order for the PR-216 to work with the BST-25, they both need to be on the same frequency. Here are the item numbers: #COPR216 (216-217 MHz) # COPR216TV56 (76-88 MHz)

Q: 2. It appears that the cable is USB Type-C to USB Type-A. Is it possible to use a regular USB Type-C to USB Type-C for the microphone connection?

A: Yes, it is possible to connect this Polsen Omnidirectional Boundary microphone to the USB-C port on a computer, using a cable like I am linking below: https://bhpho.to/3DsGogu

Q: 3. Will this work with TV? Will it work with the plugged-in microphone at church? (It works fine with the microphone in the Chapel.)

A: The Comtek PR-75a AutoSmart-Tuning receiver is designed to integrate with non-compand transmitters tuned to 72-76 MHz. Both a TV and an audio system in a church would need to have a transmitter like the M-175 or BST-75 in order for the PR-75a receiver to work.

Q: 4. Will this work with the RODE Compact go wireless system? I noticed there is a lavalier mic specific to this wireless device, but I'd rather not spend a ton of money on a mic.

A: The Boya will not work due to the connector being incorrect. This would be a beter choice https://www.bhphotovideo.com/c/product/944398-REG/polsen__olm_10_omni_directional_lav.html

Q: 5. Is this mic or line level?

A: This cable is meant to be used with line level sources, for connecting sources into a Comtek M-216 transmitter.

Q: 6. is this mic compatible with a Sony FDR-AX33?

A: The FDR-AX33 features a 3.5mm mic input jack which is compatible with the Polsen OLM-10 lavalier.

Q: 7. what is the difference between extended low end and standard EQ?

A: The Comtek PR-75P AutoSmart-Tuning Wireless Monitor Receiver with Extended Low End boosts the low-end frequency response of the device and is more ideal for film and TV applications where more precise monitoring is required. The "standard EQ" version of the Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver enhances speech intelligibility and is designed for tour guide and assisted listening applications.

Q: 8. Will this work with the c100 using the 3.5mm slot? Thanks

A: This mic will connect to the Canon EOS C100's 3.5mm Microphone Jack.

Q: 9. What accessory do I need to mount under clothing or a shirt collar?

A: You can use the Bubblebee Industries Moleskin Invisible Lavalier Microphone Covers - 10 Black / 10 Beige / 10 White (B&H # BUBBIILCM30), or the LMC Sound CMTBK C Mount Universal Lavalier Mount (B&H # LMCMTBK), or the LMC Sound CMTVPRBK C Mount Vampire Clip Universal Lavalier Mount (B&H # LMCMTVPRBK) to mount the RODE Lavalier II Omnidirectional Lavalier Microphone under clothing or a shirt collar.

Q: 10. Everybody is asking will this work with but I gotta know. Can I use this with a RodeLink wireless system? I screwed up the included Lav, and I need to get a replacement quick until I can repair the one that came with. I know it's got a TRS connector, and the price is amazing, but I've got to be sure

A: This has not been tested with a RodeLink system at all. The transmitter requires:Input Connection Type: 3.5 mm TRS jack socket (with thread lock) The Polsen mic does not offer this connector and it is battery powered. The RodeLink transmitter supplies power to the microphone.Use this mic: Rode Lavalier Microphone B&H # ROLAV and the appropriate connector: Rode MiCon 1 Connector for Rode MiCon Microphones (Sennheiser)B&H # ROMICON1