The tan Countryman E6 Omnidirectional Earset Mic for Zaxcom Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is it safe to store batteries in this Tri-Charge without USB power supplied? Will they discharge in my camera bag?

A: Yes, it safe to store the batteries inside the Tri-Charge if there is no USB power supply connected. The batteries will discharge as it normally would if it wasn't inside of the Tri-Charge.

Q: 2. Can I charge Canon LP-E6NH battery?

A: Yes, the Jupio Tri-Charge for Canon LP-E6 can charge a Canon LP-E6NH.

Q: 3. The stated weight is 4.6 lb / 2.09 kg. That is the weight of the legs only, or with the gimball head included?

A: The weight does factor in the gimbal head as well.

Q: 4. Can this work with the atmos shogun flame and inferno

A: I'm afraid not. The Shogun Flame and Shogun Inferno do not use Canon LP-E6 Style Batteries. However if you purchase B&H # ATOMDTPCB1 to go along with a Shogun Flame or Shogun Inferno you will be able to power the monitors from any number of batteries that have a D-Tap Accessory Port.https://bhpho.to/2joKWiAhttps://bhpho.to/2xOBo67

Q: 5. Is this perfectly fine and will fit will Canon R5? Canon only takes 9V and its battery is LP-E6N.

A: Andycine does not specify this voltage. I recommend using the Canon DC Coupler DR-E6.

Q: 6. Does it work with the Blackmagic Pocket Cinema Camera 4k?

A: LanParte E6 Portable Battery with LP-E6 adapter does work with Blackmagic Pocket Cinema 4K cameras. Make sure you remove the battery door to the camera when using the adapter.

Q: 7. How many volts is the battery?

A: The voltage is 7.4V.

Q: 8. what's the size of this dc barrel? will this fit in common power adaptors like the power junkie with 5.5 x 2.5 mm DC Barrel?

A: 2.1mm is a standard size. DC plug socket Dimension: External:5.5mm Internal: 2.1mm Center Plus”+”

Q: 9. Can this be used to power the camera from a wall outlet or is the AC adapter/charger only meant for CHARGING the battery and not actually RUNNING the camera?

A: Yes this is meant to run a camera from a wall outlet, it will not charge a battery, it is strictly using a dummy battery.

Q: 10. Can you put your own ball head on this tripod? And is it waterproof?

A: Yes, you can put your own ballhead on. It is not waterproof.