You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Omnidirectional Earset Mic For Azden Transmitters

Countryman E6 Omnidirectional Earset Mic For Azden Transmitters
  • Product Code: eq77648
  • Availability: In Stock

$1,620.00 $1,992.60

The tan Countryman E6 Omnidirectional Earset Mic for Azden Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAzden: 15BT, 35BT
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB (A-Weighted)
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x 1/8" / 3.5 mm TRS Male (Locking)
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAzden: 15BT, 35BT
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB (A-Weighted)
Sensitivity2 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x 1/8" / 3.5 mm TRS Male (Locking)
Cable Length5' / 1.52 m
Cable Diameter0.079" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Nikon mirrorless

A: Yes, the Fotopro Eagle E6 gimbal/tripod combination would work well with Nikon mirrorless camera and lenses. As is typical with most gimbals, as best practice, please attach your system via your lens' tripod collar rather than via the mirrorless camera.

Q: 2. Does the power bank feature run off of the batteries or is there a power bank in the device that can charge the camera batteries too?

A: To use the Jupio Tri-Charge for Sony NP-FZ100 as a powerbank for your smart device, you would need at least 1 FZ100 battery. More batteries would last longer. To charge your FZ100 batteries from a powerbank, you can use the included USB cable plus an optional powerbank.

Q: 3. Does is item have a AA battery adapter, or cord, that can allow it to be used with a Canon flash/speedlite?

A: We do not have AA battery adapters for now, but we may do this in the future. Please follow LanParte USA Facebook site for any further updates.

Q: 4. Will this work with a Canon 6D Mark II and/or the associated handgrip (BG-E21?

A: The 6D Mark II works with LP-E6 style batteries, this should work well with the 6D Mark II. However we are not aware of how well the hand grip works when using dummy batteries.

Q: 5. Will this fit the Tascam DR-70D?

A: Just based on the dimensions in the product's specs, yes it should physically fit inside the FMX-42C case. However, I cannot tell you how well you will be able to access inputs, outputs and controls. This case is specifically designed for the Azden FMX-42a and FMX-42u mixers.

Q: 6. On a tripod only, the max height would be to the tripod's base, where the gimbal would mount. Since this is a tripod/gimbal combo, where is the max height measured to?

A: it is measured where you place the camera.

Q: 7. The stated weight is 4.6 lb / 2.09 kg. That is the weight of the legs only, or with the gimball head included?

A: The weight does factor in the gimbal head as well.

Q: 8. Will this work with the Canon 5D Mark IV?

A: if it is very good the truth I recommend it

Q: 9. Can this work with the atmos shogun flame and inferno

A: I'm afraid not. The Shogun Flame and Shogun Inferno do not use Canon LP-E6 Style Batteries. However if you purchase B&H # ATOMDTPCB1 to go along with a Shogun Flame or Shogun Inferno you will be able to power the monitors from any number of batteries that have a D-Tap Accessory Port.https://bhpho.to/2joKWiAhttps://bhpho.to/2xOBo67

Q: 10. Does it work with the Blackmagic Pocket Cinema Camera 4k?

A: LanParte E6 Portable Battery with LP-E6 adapter does work with Blackmagic Pocket Cinema 4K cameras. Make sure you remove the battery door to the camera when using the adapter.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Bose Ub-20 Series Ii Wall/ceiling Bracket

$104.85 $139.45

Xpg Xenia 15g 15.6" Gaming Laptop

$5,097.00 $7,288.71

Dell Optiplex 7020 Sff Desktop Computer

$1,887.00 $2,660.67

Asus 14" Expertbook B9 Oled Laptop

$5,097.00 $6,880.95

Da-lite 81.5" X 192" Utb Fixed Frame Screen

$14,958.00 $18,847.08

Pdmovie Smart Focus Motor Intelligent Control

$777.00 $1,126.65

Lg 17" Gram Multi-touch Laptop

$5,210.97 $7,555.91

Tiffen 6.6" Satin 1 Filter

$1,947.00 $2,589.51

Sony Burano Vocas Cheese Plate

$855.99 $1,352.46

Innova Jetmaster Photo Panel 16x24 8-pack

$990.45 $1,505.48

Hoya Prond Ex Nd Filter 82mm 6-stop

$264.99 $410.73