You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Medium Gain, Detachable Cable

Countryman E6 Directional Earset Mic, Medium Gain, Detachable Cable
  • Product Code: eq77672
  • Availability: In Stock

$1,964.85 $2,515.01

The tan Countryman E6 Directional Earset Mic, Medium Gain, Detachable Cableis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersLine 6: TBP06
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x 1/4" TRS Male
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersLine 6: TBP06
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
Sensitivity1.9 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x 1/4" TRS Male
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What does the back of the unit look like? Would it fit a Blackmagic VA or Micro Cinema Camera?

A: Yes the lp-e6 dummy battery would fit onto a Blackmagic Video Assist or Micro Cinema Camera. This unit is intended to be used with a Core SWX Power Base V-mount battery. https://www.bhphotovideo.com/c/product/1403151-REG/core_swx_pb_edge_powerbase_edge_small_form.html

Q: 2. Do you sell a dummy battery for Canon 80d?

A: This is an LP-E6 dummy battery. An LP-E6 is the kind of battery that the 80D uses. This should work with the 80D.

Q: 3. Will this power a Zacuto Gratical HD EVF?

A: Yes, When connecting the IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable to the Zacuto Zacuto Gratical HD's LPE6 battery port you will be able to power the EVF.

Q: 4. Can this be used as a dummy battery for the Tiltaing Side Focus Handle Type III for a vmount battery?

A: no this can not be used on the tilta side angle as the side handle battery cover is not designed for dummy battery use

Q: 5. What USB C power bank can this be used with?

A: Most power banks and batteries the feature A PD USB-C port can be used with the Tilta Canon LP-E6 Dummy Battery to USB-C Power Cable. The cable regulates its voltage to match the voltage of a typical LP-E6 battery I/OMagic Executive Series 10,000mAh USB Type-C Power Bank with QC 3.0 & PD 18W BH #IO010KLR00BL

Q: 6. Is this compatible with the Blackmagic Pocket Cinema Camera 4k?

A: Yes , Blackmagic Pocket Cinema Camera 4k uses LP-E6 Type Battery

Q: 7. What's the voltage regulated to on the LPE6 side?

A: It is regulated to what the actual LPE-6 batteries are set to which is 7.2V.

Q: 8. Do these earphones come bluetooth-ready, or do I have to purchase the bluetooth cable-adapter separately?

A: These are not Bluetooth compatibe. They are connected with a 3.5mm cable.

Q: 9. Is there an extension from this barrel plug to the Core SWX Battery? I noticed that this isn't a standard barrel plug & I cannot find the same standard used elsewhere.

A: Yes there is. BH #COPBECEXT is the Core SWX Powerbase Edge Cable Extension (18"). https://bhpho.to/3cOHAPO

Q: 10. Will this work with canon 5d mark iii?

A: Yes it should. The Canon 5D Mark III uses LP-E6 style batteries.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Nitecore Nb10000 Gen 2 Power Bank 10000mah

$179.85 $217.62

Cinemilled Rigging Rod Clamp Starter 5/8"

$104.97 $144.86

Ujam Virtual Bassist Rowdy 2 Plugin

$387.00 $568.89

Kramer 2-port 4k60 Hdmi Input Card With Audio

$6,120.00 $9,730.80

Rode Ntk 1" Condenser Microphone

$1,587.00 $2,063.10

10tb Red Plus 7200 Rpm Sata Iii Nas Hdd 2-pack

$1,199.94 $1,463.93

Tiffen Black Pro-mist Filter 62mm Grade 3

$122.85 $151.11

Benq Bh2801 28" Commercial Display

$4,797.00 $7,627.23

Altman Spectra Star 100w Led Luminaire 6000k

$4,306.65 $6,589.17