Switchcraft Shielded Rca Male Connector

Switchcraft Shielded Rca Male Connector - Gold Plug

Product Code: eq7776
Availability: In Stock

$13.05 $19.97

Qty

14 reviews Write a review

Description
Reviews (14)

The Shielded RCA Male ConnectorSwitchcraft Shielded RCA Male Connector - Gold Plugwith black handle and gold plug features an easy-to-assemble construction with a long handle and plug assembly. The plug features a solid-pin design and a solder cup on the center terminal to make termination faster and easier. The long handle and cable clamp can accommodate cables up to 0.290" in diameter.

Long Black Handle Gold Plug 0.290" Cable Diameter Solid-Pin Design Molded Thermoplastic Insulation

Parameters
Electrical	Contact Resistance (Typical D.O.M.J.): <0.20 Ohms Dielectric Withstand Voltage: 500 VAC (Minimum) Insulation Resistance at 500 VDC: 2000 Megohms (Minimum) Insulation Resistance (After MIL-STD-202 Salt Spray): 1000 Megohms (Minimum) Working Voltage: 250 VAC, 140 VDC Current Carry at Working Voltage (Typical D.O.M.J.): 6 A
Mechanical	Design: Solid-Pin Insert/Withdrawal Force: Dependent on Mating Jack Temperature Range: -40 to 185° F / -40 to 85° C Life: Dependent on Mating Jack Maximum Cable Size: 0.290" / 7.37 mm Diameter
Material	Pin: Gold-Plated Copper Alloy Sleeve: Gold-Plated Copper Alloy Handle: Black Cable Clamp: C.R.S., Electrotin-Plated Insulator: Rigid Plastic
Dimensions	1.58 x 0.29" / 40.26 x 7.37 mm
Packaging Info
Package Weight	0.03 lb
Box Dimensions (LxWxH)	3 x 2 x 0.1"

Related Questions and Answers

Q: 1. will this cable combine a both stereo tracks into 1 mono signal?

A: This cable will sum the left and right RCA inputs to mono when connected to a 1/4 unbalanced line input.

Q: 2. I want to record DJ mixes from my Allen & Heath mixer outbound RCA to my Marantz digital recorder's XLR inputs. Is this the right product for that purpose?

A: If the Marantz offers a LINE input via XLR , then this cable should work.

Q: 3. Is this connector Size D?

A: Yes, it fits a standard, D size panel cutout, same as an XLR connector.

Q: 4. what is the max. dia. of cable that goes into this plug?

A: The outside diameter of cable used with the Amphenol AC Series RCA Male Cable Connector with Diecast Shell (White) (B&H# AMACPRWHT) should be less than 1/4" (i.e. 6mm).

Q: 5. Will this work with the BMD SDI to AUDIO??? Audio jack output to RCA input in my amp.

A: thank you for your question. You can use this cable to connect the output of the BMD SDI TO AUDIO to your amp or receiver.

Q: 6. can i use these as phono cables??? i need to replace my rca cables in my technics 1200 turntables.

A: Yes, this will work with rca phono connections on a turntable.

Q: 7. What is the weight capacity of that peak design safety tether? Can it really stop the fall of a 7ibs+ camera? Looks lacking....

A: Based on information provided by Peak Design, their tethering products, like what is included with the ProMediaGear QD Plug Connector for Straps, have a weight capacity of up to 200 pounds.

Q: 8. Can this be used as a SPDIF digital cable?

A: Yes it can

Q: 9. I'm trying to connect a home pre-amp and external amp together. Are two of these what I need?

A: If the outputs on your preamp and inputs on your amplifier are RCA type connectors. then this is the type of cable you will need. The types of outputs and inputs on the preamp and amplifier dictate the type of cables you will need.

Q: 10. where do you plug the rcas? theres a few different audio plug in options on the back of my tv, if i want to plug it from my computer which set will help me get sound from the tv

A: I still run a 3.5 sterio wire

Jason	18/09/2024
[0.03 lb] The 35HD plug is outstanding. This superb connector will probably outlast whatever it is attached to. I can solder wires to its tabs without having to add a bit of flux on them first, then I firmly close its clamp around the cable to secure it with an iron-clad grip. Its contacts get a great fit in any 3.5mm jack. A handy tube insulator is included, too. If you are a clutz and tend to eventually break the mini plug on cables, this is the replacement plug for you. This one will not break anywhere near as easily as the original plug of any cable using a 3.5mm TRS plug. The similar Neutrik NYS231/226 plugs can easily be bent in a random moment of carelessness, but not this Switchcraft plug. The wide opening in the rear of the casing is big enough for up to 4x22awg cables with outer jacket and all, but I have only ever used smaller cables than that. This is my go-to plug for repairs or building custom cables with the look that I want to help differentiate different cables connected to different equipment more quickly and easily. 5

John	11/09/2024
[0.03 lb] the American version of these are Farr superior. 5

Scott	27/08/2024
[3 x 2 x 0.1"] Not much to say here. I like these better than Neutrik 1/4 connectors due to the size and ease of unscrewing. They fit in everything I have ever used them in, and should last for many years. 5

anyonymous	09/08/2024
[3 x 2 x 0.1"] It's Switchcraft - I trust them. Everyone else can be in love with Neutrik but I've never had a problem with a Switchcraft and they have stood the test of time. 5

Paolo	07/08/2024
[0.03 lb] My Pioneer SX-727 interconnect jacks are very close together making the use of quality interconnects impossible. These Switchcraft plugs have a much narrower barrel diameter, thus eliminating the issue. I clipped the original plugs off of my interconnects and soldered these on - easy-peasy. 5

John Bonnell	26/07/2024
[0.03 lb] One of the best. 5

Joseph	22/07/2024
[0.03 lb] Nobody can say you don't know Jack, because you clearly know good jacks ! Have a nice day and do not believe what the tv tells you! 5

Kevin	02/07/2024
[3 x 2 x 0.1"] I needed short rca connectors, these fit the bill. Easy enough to solder, just beware that there isn't a lot of room in the body for strain relief. Make sure you cut and strip the wires properly. 5

Angel	26/06/2024
[0.03 lb] Exelent. very good quality and easy to assemble. 5

Special Edition Customs	09/05/2024
[3 x 2 x 0.1"] I do high end audio video and security. The best way to have reliable RCAs is to make them yourself. I have tried dozens of rca ends and this one is my favorite!! Great Product 5