An enhanced version of its predecessor, the Godox BOORAY Kit for Canon - Compact Flash Solutionfrom Godox BOORAY Kit for Canon - Compact Flash Solutionis built around a unique flash source with a standard speedlight head and a bare bulb head that give you the option of two distinctly different qualities of light. The kit comes with the two heads, lithium battery, charger, and carry case.

The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 1.8 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.

The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.

Speedlight & Bare Bulb Head    Built-In 2.4 GHz Wireless X System    Compatible with Canon E-TTL / E-TTL II    31.5 x 31.5" Softbox & 9.5' Light Stand    200Ws of Power Adjustable in 9 Steps    High-Speed Sync up to 1/8000 Second    Lithium-Ion Battery Pack and Charger

The second generation of this sleek and versatile strobe, the AD200Pro has a series of enhancements over its predecessor:

• Dedicated Stable Color Temperature Mode, which improves color consistency to within +/- 100K throughout the entire power range

• Expanded nine stop power range, from 1/256 to 1/1, with 1/10th-stop increments

• Faster full-power recycle time of 1.8 sec

• Inclusion of a USB Type-C port for updating the flash's firmware

• Upgraded metal flash holder/umbrella mount for more secure and stable attachment to light stands

• Enhanced control panel with recessed design, additional navigation buttons, and a revised On/Off switch

Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, and Fuji TTL.

Bare bulb and speedlight flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range.

The 14.4V / 2900mAh battery pack gets 500 full power flashes with 0.01 to 1.8 second recycling.

Easily readable digital panel displays your adjustments

Barn Doors, color filters, and diffusers are available to personalize your work.

• 9-Step Power Range: 1/1 to 1/256
• Supports flash exposure compensation
• 1/8000 second High-Speed Sync
• First and second curtain sync
• Modeling lamp
• Manual flash
• Multi flash
• Custom functions

Related Questions and Answers

Q: 1. MagMod MagShoe 2 Ergonomic Cold Shoe Bracket

A: No, the MagMod MagShoe 2, https://bhpho.to/3NRDJBJ is made for shoe mount flashes not the Godox AD200Pro TTL Pocket Flash Kit.

Q: 2. Hello, I was wondering if this light could be used as a continuous light as well? And which option of trigger should I choose if I am shooting w a film camera(Mamiya RZ67)?

A: Yes. But led head is needed. Please review the following item. Be mindful that the unit only offers 3.6w. Godox AD-L LED Head for AD200 Pocket Flash BH #GOADL • MFR #AD-L https://bhpho.to/3hKAZai

Q: 3. Is the Godox AD200Pro compatible with a TRIGGER for a Flashpoint Evolv200?

A: Please refer to the following list of compatible transmitters for the AD200 Pro. https://bhpho.to/2oUITpZ

Q: 4. Does this set has 2 chargers and 2 batteries in total?

A: Yes, two chargers and two batteries are included with this Godox AD200 Dual Flash Kit with Bracket and X2 Trigger for Sony.

Q: 5. Will this work with Canon R6 Mark II? I heard there is a compatibility issue with the new hot shoe mount?

A: The commander has to put in single pin mode.

Q: 6. I have a Canon System 5dsr and a Fuji system. I am looking to add Godox flashes and remote wireless triggers. Is there a model that is compatible with both systems?

A: The AD200 Pro is compatible with both Canon and Fujifilm cameras. You would need a transmitter for each TTL system. For Canon, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras, BH # GOXPROC can be used. For Fujifilm, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras, BH # GOXPROF can be used. https://bhpho.to/3ix9xhj https://bhpho.to/2Z4DAG3

Q: 7. can someone explain the word "BOORAY" to me? or is this just a marketing word that means nothing?

A: The name Booray was most likely chosen to differentiate the AD200 kits that include a softbox, stand, and a trigger.

Q: 8. Is there a way to use this with a film camera with a pc connection?

A: Yes. Via pc connection or commander Please review the following item https://bhpho.to/3gMbJzW

Q: 9. Is Godox AD200 Pro compatible with Canon Rebel T6?

A: Yes, the Canon Rebel T6 can work with the Godox XProC Trigger to fire the AD200 Pro.

Q: 10. I don't see any flash shoe. Is this really an on-camera flash?

A: No, this flash is meant for a light stand, etc... not meant for on camera.