Protect your investment with the Fruity Chutes Parachute for Inspire 2 with Sentinel Triggerfrom Fruity Chutes. This orange and black lightweight parachute system is engineered to allow for automatic deployment, providing your Inspire 2 with a nice gentle landing. Automatic deployment is handled via the Sentinel triggering system, which can detect a variety of drone failures in as little as 0.5 seconds. Parachutes are ejected via a high-energy compressed spring so you can take the system with you to any location. You can even be conveniently folded and packed by the user for multiple uses without requiring shipment to the manufacturer. For added safety, this model has an automatic flight terminator that stops the propellers from spinning when the parachute ejects.

For DJI Inspire 2 Drones    Automatic Deployment    Take Anywhere, Spring-Based Ejection    Flight Terminator Stops Props on Eject    Automatically Deploys in 0.5 Seconds    1000 lb Parachute Break Strength    Does Not Require Drone Power    Repack & Reload Yourself    Can Be Used Multiple Times    48" Iris Ultralight Parachute

If something goes extremely wrong during flight, the Sentinel triggering system is there to automatically step in and save the drone. The system can detect if the drone suddenly falls, rolls, or flips. Detection happens in as little as 0.5 seconds, which equates to roughly 6' of free fall. Typically, the chute will deploy before a pilot notices there's an issue. The Sentinel system has its own 500mAh battery so the chute can be deployed even if the drone experiences a complete power failure. The battery provides up to six hours of continuous operation and can be charged via an optional USB cable. To help keep the battery fully charged, power is provided by the Skycat launcher's V3 trigger switch's 5V power supply.

A carbon fiber Skycat X48 launcher is used to eject the parachute by utilizing a high-energy compression spring. This allows the parachute to be ejected out and away from the drone quickly while having no regulatory or transportation limitations. The launcher operates via a fuse wire that can be replaced with the extra wire that's included. The fuse wire holds the ejection piston in place, and when it's time to eject, a servo signal is sent to put current through the wire to melt it. A dedicated 800mAh LiPo battery provides power for launch when needed.

The carbon fiber Skycat X48 launcher is mounted onto a baseplate with M3 bolts, and the unit attaches to the airframe with included hook-and-loop straps. There's a dedicated compartment that keeps launch electronics safe, and there's room for the fuse trigger and battery. The automatic triggering system mounts onto the back of the compartment for easy access to arming or disarming it. The added weight of the mount typically only impacts flight time by approximately two minutes.

This Fruity Chutes parachute does not rely on the drone to operate. The entirely self-contained system means it can protect your drone even in the event of power failure.

The Iris parachute weighs only 2.6 oz, yet it can provide a gentle landing to drones that weigh between 7 and 11 lb, allowing them to land at a rate of 15 feet per second. The parachute uses eight shroud lines that are each rated at a 200 lb break strength. The parachute bridle uses 1000 lb Spectra material, and the overall break strength of the chute is approximately 1000 lb of pull force.

There's no need to send your parachute back to the manufacturer after every deployment. The system is designed to let you refold, repack, and reload the parachute multiple times. A parachute rigger jig is included to help you quickly and easily fold the parachute properly.

Nearly everything you need to attach the parachute system to your drone is included. All you need to provide are simple tools. The parachute is designed to mount next to the battery to minimize its impact on flight. To help take the stress out of installation, online tutorials and other resources are available to walk you through the process.

Related Questions and Answers

Q: 1. Is the underarm strap removable if you don't want to use it?

A: Yes, you can remove the under arm strap, the splits in the clasp allow you to remove it from the pad.

Q: 2. Is it fireproof? How much it weight loaded with a full set of batteries? Is it compliant with handbag luggage rules for civil aviation ?

A: It is not fireproof. Check with the individual for their carry-on or checked baggage rules. Also check withe TSA.The batteries weigh in at 515 g (18.2 oz).Case details: This case is air tight, waterproof, dustproof and made in the USA. The CasePro DJI Inspire 2 Hard Case fits up to 14 batteries, battery charging hub, and battery charger. This case is the best solution for every Inspire 2 pilot, allows for more flight time, travel and storing away your Lipo batteries. FAA regulations now require carrying on Lipo batteries. Part No.CP-DJI-INSPIRE-2-BTProduct NameCasePro DJI Inspire 2 Battery Carry CaseInterior Length16.88Interior Width11.19Interior Height6.00Removable LidNoLid Height1.75Base Height4.25Exterior Length18.25Exterior Width13.79Exterior Height6.81MaterialHigh Density PolypropyleneHigh Density Polyethylene FoamInsane FoamManufacturing ProcessInjection MoldedInteriorDJI Inspire 2 battery insertColorBlackWater ResistanceWaterproofHingesStainless steel pin hingeLatchesTrigger release latches (2)Security Options2 padlock provisionsAta RatedYesWeight10.00 lbs.

Q: 3. Does this come with the ProRes and CinemaDNG license?

A: The DJI Inspire 3 Drone can natively record CinemaDNG up to 8K25p or Apple ProRes RAW up to 8K75p.

Q: 4. Coming from a Peak Design system, could this sling strap be fitted with AL-4 anchor link(s)?

A: You could remove the D rings and attach the Peak Design AL-4 anchor system, however, the release system on the RucPac Sentinel Camera Strap is just as secure as AL-4.

Q: 5. Is the underarm strap really of any benefit?

A: Yes it keeps the strap from rolling forward and backwards, but if it is not comfortable for the way you use your camera, you can remove it if need be.

Q: 6. Does a lens come with this kit?

A: No, the DJI Inspire 3 Drone does not include a lens.

Q: 7. The strap holds the heavy camera at one point only. Will the camera strong enough to have all the weight at one point only?

A: According to the manufacturer it was tested to hold over 100kg or 220lbs. If you have a large lens attached you might want to attach the strap to the lens and not the camera strap eyelets.

Q: 8. How far away from each controller can operators be?

A: Maximum Communication Distance: 2.4 GHz: 492' / 150.0 m 5.8 GHz: 328' / 100.0 m

Q: 9. How does this mount to my 70-200 and 500mm lenses?

A: You would need RucPac 1/4" Screw Strap D-Ring in order to attach the strap to your lenses 1/4-20 threads.

Q: 10. Are the lenses of the Inspire 2- X7, compatible with the new X9?

A: Both drones can use the DL 24 mm, 35 mm, and 50 mm lenses (Inspire 2 with the X7). But the Inspire 2's 16 mm lens is not compatible with the DJI Inspire 3 Drone.