The Google Nest Wifi Router and Point Snowsupports Wi-Fi 5 (802.11ac) and is more powerful than its predecessor, Google Wifi, delivering up to two times the speed and up to 25 percent better coverage. The Nest Wifi point allows for whole-home coverage and the system is scalable, allowing you to add more points in the future. The Nest Wifi system can handle multiple 4K video streams at the same time. The Nest Wifi system also supports proactive band steering, a self-healing network, and transmit beamforming. The router and the point feature the Snow color.

The Nest Wifi router can cover up to 2200 square feet while the Nest Wifi point can cover up to 1600 square feet. The router supports 4x4 MU-MIMO and the point supports 2x2 MU-MIMO. The router also has dual Gigabit Ethernet RJ45 jacks.

The Nest Wifi point features a 360° speaker with a 40mm driver and far-field microphones for Google Assistant. It also has capacitive touch controls. The point also has Bluetooth 5.0 connectivity.

Google built the Nest Wifi system to provide the foundation for your future smart-home devices. It has local home connectivity, allowing some devices to connect directly to the system without a hub. Use the Google Home app for a simple setup and controls.

Wi-Fi 5 (802.11ac)    Up to 2200 Mb/s (Router)    Up to 1200 Mb/s (Point)    2.4 GHz / 5 GHz (Dual-Band)    2 x Gigabit Ethernet RJ45 Ports (Router)    Whole-Home Mesh Coverage    Speaker | Google Assistant (Point)    WPA3 Encryption | Auto Security Updates    Can Support Multiple 4K Video Streams

The Nest Wifi router is capable of handling up to 100 connected devices. The Nest Wifi point can also handle up to 100 connected devices. It's also fast enough to stream multiple 4K videos at the same time (dependent on your ISP broadband connection).

The Nest Wifi router plugs into your modem and creates a wireless network with a strong, reliable signal. The included Nest point is used to expand Wi-Fi coverage. The Nest Wifi point also features a smart speaker that can play music and supports Google Assistant. As you move from room to room, you'll get connected to the fastest Wifi point. It will also put your network on the clearest channel and the fastest band to avoid congestion.

The Nest Wifi router provides up to 2200 square feet of coverage and intelligently works behind the scenes to make sure your Wi-Fi remains fast and reliable so that you can walk from room to room with an uninterrupted signal. Set up your network using the Google Home app, which allows you to manage connected devices and their access. Add Nest Wifi points for additional coverage. Automatic updates help your network stay safe and secure.

Each Nest Wifi point works with a compatible router to provide an additional 1600 square feet of wireless coverage while intelligently working behind the scenes to help ensure you have a fast, reliable, and uninterrupted signal as you move across your home. Nest Wifi points have a speaker with the Google Assistant built-in, working with compatible connected devices to play music, manage your network, and more using voice commands.

With an advanced security chip, WPA3 encryption, and automatic security updates, the Nest Wifi router helps keep your wireless network safe and secure.

The Nest Wifi router is made from 45 percent post-consumer recycled plastic while the point is made from 40 percent post-consumer recycled plastic.

Related Questions and Answers

Q: 1. Do it work with 220v baseboard heater ?

A: No it will not: Compatible with most 24V heating and cooling systems. While most 24 V heating and cooling systems are compatible with Nest thermostats, there are some systems that aren’t compatible. You can quickly tell if you have one of these systems without having to use the Compatibility Checker or to look at your thermostat’s wiring. If you have one of the system types below, it won’t work with a Nest thermostat. Proprietary systems If you find wires in your thermostat’s connector that have non-standard labels (for instance 1,2,3, or A, B, C), your system is proprietary. If your system only has two wires, but you have both heating and cooling, your system is likely proprietary. Proprietary systems aren’t compatible with Google Nest thermostats. However, some proprietary systems can be rewired by a pro installer to be compatible. Proprietary wires Millivolt heaters Millivolt systems are typically wall heaters or floor heaters and use electricity or natural gas. These systems use much less electricity than low voltage systems and can't deliver the right amount of power to Nest thermostats. Picture of a floor furnace and wall-mounted furnace High voltage systems High voltage systems are usually electric baseboard heating systems or other radiant systems powered by electricity. High voltage thermostats are often built into the wall and typically have two to four thick wires coming out of the thermostat. Wire nuts are often used to connect the thermostat to the system wires. High voltage thermostats are usually labeled 110, 115, 120 or 240 VAC. Note: In some cases, it is possible to make a high voltage system Nest-compatible. Contact a local pro and have them install a step down transformer to 20 - 30 V. High voltage thermostats should only be installed or uninstalled by a professional due to the high voltage that they carry. high voltage text high voltage wire nut Solid fuel systems Systems that use coal, wood chips, pellets, anthracite, or other biomass materials are typically incompatible with Nest thermostats. Solid fuel system Wired remote sensors Remote sensor wires are typically used to give your thermostat outside weather data. These wires can’t be connected to Nest thermostats. But Nest thermostats don’t need wired sensors since they get weather information over Wi-Fi. Even if your system has sensor wires, it may still be Nest-compatible. Some micro-controller based systems Systems that use micro-controllers instead of relays are sometimes more sensitive to power sharing. If you have a micro-controller based system, your Nest thermostat may need a C-wire to be compatible with these systems. Systems that can’t deliver enough power Some systems can’t deliver enough power (at least 20 volts) over the existing system wires, so a Nest thermostat’s battery may slowly drain and eventually cause the thermostat to turn off. These systems are sometimes called high impedance systems. You may be able to install a C-wire to make your system compatible with a Nest thermostat. Contact a local pro. Some system hardware such as gas valves and zone or relay panels require a C-wire to work with Nest thermostats. If you would like to find out more information about installing a C-wire, contact a local pro. Gas valves Some gas valves on systems vibrate or buzz when a Nest thermostat is installed. This can usually be fixed by connecting a C-wire. Zone relay or control panels Some systems have control panels or equipment interface modules that require a C-wire to be compatible with Nest thermostats. Below is a list of some known panels that require a C-wire. This list is not meant to be comprehensive, so your system may be incompatible even if it isn’t listed here. Beutler ZTE2S Bryant 548F036 Carrier HK42FZ011 Honeywell AQ25110B Honeywell EMM-3 Honeywell HZ221 Honeywell HZ311 Honeywell HZ322 Honeywell HZ462 Honeywell Trol A Temp MABS EZ Honeywell TZ-4 Lennox LZP-2 Nordyne 624631-A Nordyne 903915A Villara ZTE2S Waterfurnace ATV045A 110CIT White-Rogers 36C03-300 ZoneX DigiTract 4 Ztech ZTE2S Incompatible system wiring Too many stages of cooling or heating Nest Learning Thermostats are only compatible with systems that have one or two stages of cooling. The Nest Thermostat E is only compatible with one stage of heating, one stage of cooling, and an additional stage of either heating or cooling. International systems Some international systems, such as Buderus boilers, have dry contacts or other incompatible wiring. These systems may require relay panels in order to be installed with standard American thermostat wiring. Heat pumps with L wires L wires are typically used to show system status, like emergency heat being on. Nest thermostats can work with systems that use Service Light (L) wires. While L wires can't be connected to the Nest thermostat, they don’t need them. The Nest thermostat and Nest app will show you system status information without connecting L wires.

Q: 2. Can I connect this router through a TP-Link ER605 so I can keep my Ethernet devices?

A: Yes, the Google Nest Wifi Router and Point can be connected to the TP-Link ER605.

Q: 3. Is there a limit on the quantity of nodes with a system?

A: No, there is not a limit to the number of WiFi points in a Nest Wifi Pro system.

Q: 4. How is the two pack product packaged? Are the two wrapped in one package like a different product with single unit? Or B&H just put two in one box?

A: The Pair Kit is 2 separate manufacture packages of the Google Nest Audio.

Q: 5. My daughter gave us "Alexa" for us to video chat her, will Google Nest work with this?

A: Yes, it is compatible with Amazon Alexa https://support.google.com/googlenest/answer/9325080?hl=en

Q: 6. Does this product have international warrantee?

A: No. This would come with a 1 year manufacturers USA manufacturers warranty .

Q: 7. Is this 1st generation Nest?

A: The Google Nest Wifi Router and Point (Snow) BH #GOGWFS1C1W2P replaces the model before which was called Google Wifi, it is the second gen of google Wifi products although the 1st one under the Nest label.

Q: 8. Can this version of the nest work with a dual fuel (gas and heat pump) forced air furnace?

A: Yes it will. But per Google: Your system requires advanced configuration and wiring. If you have one of these systems, contact a local pro. Important: Professional installation is recommended for some systems since their wiring and setup can be complicated. These include: Dual fuel systems (heat pump with furnace) Dual transformer systems (Systems that have more than one R wire) Whole-home humidifiers and dehumidifiers (compatible with Nest Learning Thermostat only) https://bit.ly/3tQsn6k

Q: 9. IS THIS THE 2ND GENERATION?

A: Technically, yes. Google WiFi 2 or simply Google Nest is what they have rebranded the system. Of note, There is now one main (and larger) router and smaller "points" are the remote units And they have speakers making them Google Assistant devices.

Q: 10. What kind of Ethernet cable is included? Is it cat 5, 5e, 6 ?

A: It is not specified. But most cables of this class are CAT 5e.