Uurig Double Hot Shoe Bracket For Canon M6 Mark Ii

Product Code: eq78647
Availability: In Stock

$47.85 $75.12

Qty

15 reviews Write a review

Description
Reviews (15)

The UURig Double Hot Shoe Bracket for Canon M6 Mark IIfrom UURig Double Hot Shoe Bracket for Canon M6 Mark IIallows a microphone or fill flash to be mounted on the camera. Made of aluminum alloy, the bracket doesn't obstruct any ports or keys.

Does Not Block any Keys or Ports Allows Microphone / Fill Light on Camera Aluminum Allow Construction

Parameters
Material of Construction	Aluminum
Dimensions	3.39 x 0.98 x 0.71" / 86 x 25 x 18 mm
Weight	2.1 oz / 19 g
Packaging Info
Package Weight	0.07 lb
Box Dimensions (LxWxH)	4 x 1.8 x 1.6"

Related Questions and Answers

Q: 1. can the microphone port still be accessed to plug in a microphone if it is attached to a tripod vertically?

A: Due to the L-component being situated on the right-side of the camera, certain accessories might be a little tight to squeeze in when mounted vertically. If you look through some of the photos, you'll see they were able to connect a microphone and light still, but your mileage may vary.

Q: 2. Does this work w/ Osmo mobile 4?

A: Yes, the UURig Dual Cold Shoe Bracket for DJI Osmo Mobile 3is also compatible with the DJI OM 4 SE Smartphone Gimbal.

Q: 3. will this work with the RRS BH-40 full lever ballhead?

A: The RRS full lever ballhead requires an RRS L bracket to be 100% secure. I wouldn't recommend an L bracket from a different manufacturer if you want to be 100% secure.

Q: 4. Does this work with the Osmo Mobile 6? I need a hot shoe mount for Rode receiver

A: The UURig Dual Cold Shoe Bracket for DJI Osmo Mobile 3 does not specify compatibility with the Osmo 6 model. It will be able to attach, but the ergonomics of the grips are slightly different, so it may not be very secure.

Q: 5. Does this l bracket allow use of the flip screen

A: Yes, you can articulate the LCD of your Canon R5 & R6 mirrorless cameras using the Kirk L-Bracket for Canon EOS R5 & R6. A small section of your camera LCD is going to be blocked by the vertical plate on the L-bracket.

Q: 6. Is the Kirk L Bracket QD System strap mount same as the one for RRS QD System? Thanks.

A: The QD System strap mount is the same on both Kirk and Really Right Stuff L brackets.

Q: 7. How much does the bracket weight?

A: The weight of the bracket is approximately .31 lbs.

Q: 8. is there an adapter that will let your camera fire both a broncolor transceiver and a profoto one at the same time?

A: You can use this but in full manual only; no TT-L.

Q: 9. Would this fit R5C?

A: Yes, the Kirk L-Bracket for Canon EOS R5 & R6 is compatible with the Canon R5C. This has been tested in our store.

Q: 10. will this fit the new R6 MKII ?

A: Yes, the Kirk L-Bracket for Canon EOS R5 & R6 (BH #KIBLR5 • MFR #BL-R5) will fit the Canon EOS R6 Mark II Mirrorless Camera.

Chris	18/09/2024
[0.07 lb] Bought this for my Canon Vixia HF G10 video camera, which has a mini shoe at the very back. I need to mount an Azden dual channel wireless receiver and a SunPak LED light. The hot shoe extension is 8 in. long and rotates and slides fore and aft for easy adjustment. I use it with a Pearstone mini shoe adapter. To prevent the whole unit from being front-heavy when loaded, I attached a small wooden leg that rests upon the camera top and it affixed with a bit of velcro to keep it from sliding. Works great. (as an alternative, I might look at the Opteka X-Grip (B&H # OPXGRIPBK) along with this extension. Made of strong plastic, so it's very light, but solid. 5

Chris	18/09/2024
[0.07 lb] Bought this for my Canon Vixia HF G10 video camera, which has a mini shoe at the very back. I need to mount an Azden dual channel wireless receiver and a SunPak LED light. The hot shoe extension is 8 in. long and rotates and slides fore and aft for easy adjustment. I use it with a Pearstone mini shoe adapter. To prevent the whole unit from being front-heavy when loaded, I attached a small wooden leg that rests upon the camera top and it affixed with a bit of velcro to keep it from sliding. Works great. (as an alternative, I might look at the Opteka X-Grip (B&H # OPXGRIPBK) along with this extension. Made of strong plastic, so it's very light, but solid. 5

James	05/09/2024
[2.1 oz / 19 g] Followed them to the letter including using tape to remove dust before putting the glass down. Worked well so far but only been in use for a week. 5

Irma Patricia	19/08/2024
[0.07 lb] It's a nice plate to carry around 5

Irma Patricia	19/08/2024
[0.07 lb] It's a nice plate to carry around 5

John	13/08/2024
[2.1 oz / 19 g] Excellent instructions. Finicky to place knowing you can't adjust it after you place it. 5

John	13/08/2024
[2.1 oz / 19 g] Excellent instructions. Finicky to place knowing you can't adjust it after you place it. 5

Heng	12/08/2024
[4 x 1.8 x 1.6"] very easy to install, looks good. got 2 pieces of glass in the package. so you have 2nd try if failed first time. good product over all. 5

New	08/08/2024
[2.1 oz / 19 g] Needed to replace my original bracket because it was misplaced. Seems to be the same bracket that came with my 24x24 Ezybox. Well made and functional.I use it with a Nikon SB900 and the fit is perfect. 5