The cocoa Countryman E6 Directional Earset Mic with 3.5mm Locking Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Hello, Which Sennheiser headmics are compatible with this bodypack transmitter ?

A: The Sennheiser EW-DX SK Digital Wireless Bodypack Transmitter with Locking 3.5mm Connector is compatible with a wide variety of Sennheiser headset microphones, including the Sennheiser ME 3 Cardioid Headmic for Wireless Systems (B&H # SEME3), the Sennheiser HS 2 Headset Microphone - Beige, Locking 3.5mm Connector (B&H # SEHS2BE), the Sennheiser HSP Essential Omnidirectional Neckworn Microphone with 3.5mm Connector - Beige (B&H # SEHEOBGH), the Sennheiser HSP4 Headworn Microphone (B&H # SEHSP4EW3), the Sennheiser Headmic 4 BE Headset Microphone - Beige, 3.5mm Locking Connector (B&H # SEHDMIC4BE), the Sennheiser HT 747 Supercardioid Fitness Headset Microphone with Neckband - Black/Black (B&H # SEHT747BLACK), the Sennheiser HSP2 Head-Worn Microphone - Black (B&H # SEHSP2EW), the Sennheiser SpeechLine Digital Wireless SL Headmic 1 Headworn Microphone - Black (B&H # SESLHM1BK), and any other headset microphone made by Sennheiser or another manufacturer that is wired for compatibility with a Sennheiser wireless transmitter.

Q: 2. Will this work for a Mefoto Monopod?

A: Unfortunately no, the thread sizes are not compatible.

Q: 3. is this locking base compatible with the Benro monopods MAD38C and MAD38A ?

A: Yes, its compatible.

Q: 4. Will the VT2 work as designed to stabilize and fold up on my Benro MSD46C Monopod?

A: This base is not compatible with that monopod.

Q: 5. Will it also fit for the Manfrotto 420B and the Manfrotto 420CSU nightstand?

A: It should fit if the tubing is 22mm and round. I've checked both the 420B and 420CSU, they both have 22mm tubing. Besides, 110 casters were under the 420B recommended accessories list.Bare in mind that the 110G has bigger wheels (100mm) than the 110 wheels (75mm). Both have brakes, but it all depends on how you use it and on what stand.Hope this helps.

Q: 6. How long is each foot section?

A: The feet are approximately 5 3/4" long.

Q: 7. How long is the cable on this? Can an extension cable be used if needed?

A: Hi Jonathan,The cable is 36 or 3'. There is no extension cable available through Kinotehnik.

Q: 8. Are these full extensions drawers? Does the entire depth of the drawer protrude beyond the units face?

A: This locking drawer does open fully.

Q: 9. Will this work on my Feisol monopod?

A: The Benro 3-Leg Locking Base attaches to any monopod with a 3/8 -16 female thread on its foot. So, if your FEISOL has a 3/8 -16 thread on it's bottom, it would be compatible with the Benro Base.

Q: 10. Will this be compatible with the Manfrotto Element Aluminum Monopod (Red)? https://a href= http://www.bhphotovideo.com/c/product/1296072-REG/manfrotto_mmelea5rd_element_aluminum_monopod_red.html target= _blank www.bhphotovideo.com/c/product/1296072-REG/manfrotto_mmelea5rd_element_aluminum_monopod_red.html/a

A: Yes, if you use this adapter. K&M Female 3/8 to Male M8 x 12mm Thread Adapter B&H # KMTAZCB Expected availability: End of Jun 2018.