The 20" XLR Female to TA3 Male Cable for Blackmagic Camera (2-Pack)offers a high-quality solution for connecting a microphone or wireless receiver to a Blackmagic Pocket Cinema camera. Durable and flexible cable, it utilizes a polyurethane jacket that is resistant to cold and physical damage such as crushing and tearing. This slim cable, only 3.2mm in diameter, features a straight XLR 3-pin female connector on one end and a straight TA3 male connector on the other.

For Blackmagic Pocket Cinema 4K/6K    XLR 3-Pin Female Connector    TA3 Male Connector    Slim 3.2mm Cable Diameter    Durable and Flexible    Polyurethane Jacket    Crush-, Tear-, and Cold-Resistant

20" XLR 3-pin female to TA3 male balanced cable for Blackmagic Pocket Cinema cameras or Video Assist 4K

Great for microphone or wireless receiver mounted on Blackmagic Pocket Cinema 4K/6K cameras

Slim 3.2mm cable diameter

Ultra-flexible PUR polyurethane jacket material is crush-, tear-, and cold-resistant

Extremely durable

Related Questions and Answers

Q: 1. A lot of these cables seem to short one of the signal pins to ground, which can cause issues or even damage output circuits. Is this the case here?

A: As our trusted rep from Hosa has mentioned, this is an unbalanced cable with pins 1 and 3 connecting to the sleeve while pin 2 connects to the tip. The Rean connectors used in its construction are pro quality and made by Neutrik. An unbalanced XLR to 1/4" cable like this one has a 1/4" TS connector which won't short the signal when used to connect to an unbalanced input. Avoid using balanced XLR to 1/4" TRS cables, which could cause issues when used to connect to an unbalanced input.

Q: 2. Can I use this to connect the 2 line XLR outputs from a Sound Devices Mix Pre-D to the Sound Devices 633 TA3 inputs?

A: The Remote Audio CA744INL Dual XLR to Dual TA3 Channel 3/4 Input Cable can be used to connect the 2 line XLR outputs from a Sound Devices Mix Pre-D to the Sound Devices 633 TA3 inputs.

Q: 3. Will this work with the Zoom F8?

A: No it is specifically for the Sound Devices 744TH. The CA744INL Dual XLR to Dual TA3 Channel 3/4 Input Cable for 744TH (48") from Remote Audio is an audio input cable designed to be used with line level signals for input channels 3 and 4 on the Sound Devices 744T digital field recorder. The cable is 48" long and has a pair of 3-pin XLR female connectors at one end and a pair of TA3-F connectors at the other. The connectors are color-coded for easy management.

Q: 4. trying to hook a line level mixing board and convert it to mic level and connect it to a Magewell USB Capture HDMI 4K Plus. Will this work?

A: This will work, with the appropriate cables (see links below) , it will reduce mixer output by 50dB, which may then be connected, with the proper cable, to a Mic input. https://www.bhphotovideo.com/c/product/68603-REG/Shure_A15LA_A15LA_Line_Adapter.html https://www.bhphotovideo.com/c/product/133543-REG/Comprehensive_XLRP_SPPS_3ST_EXF_Series_Stereo_1_4.html https://www.bhphotovideo.com/c/product/133524-REG/Comprehensive_XLRJ_MPS_3ST_EXF_Stereo_Mini_Male.html

Q: 5. I buy sm57 vip president kit they r not provide me any cable how I operate this

A: Each SM57 requires an XLR cable to connect it to your chosen output (typically either the input of a mixer or powered speaker). The end that connects to each SM57 should be XLR Female, and your mixer or speaker should have either an XLR inuput (where you can plug in an XLR Male cable termination) or 1/4" input for a 1/4" Male cable termination. In summary, you will need either two XLR F to XLR M cables or two XLR F to 1/4" M cables, depending on what you are plugging the two mics into.

Q: 6. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: Yes, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable can be used with the Xvive Audio P1 Portable Phantom Power Supply and Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 7. How does an unpowered/passive transformer provide 24dB of gain?

A: The 24dB of gain provided by the Shure Microphone Matching Transformer XLR Female to 1/4" Male is achieved when connecting a balanced low-impedance microphone output to an unbalanced high impedance input.

Q: 8. Will this cable work in Hollyland Lark Max transmitter? I'm using rode NTG4+ SHOTGUN MICROPHONE

A: Yes, the Kondor Blue Braided Female XLR to 3.5mm TRS Male Audio Cable could be used to connect an XLR microphone to a wireless transmitter, but any condenser microphone connected in this way would have to be battery-powered.

Q: 9. How long are these cables ? 18” & 24” ?

A: The TFX-8 cable measures 21 inches in length.

Q: 10. is this cable can be use with Sound Devices MixPre-10 II also ?

A: Yes you can use the Zoom TXF-8 TA3 to XLR Cable with the left and right outputs on the Sound Devices MixPre-10 II.