The light beige Countryman E6 Directional Earset Mic for WisyCom Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this fit snug on a 70-200mm ring and not slip at all?

A: The ridge at the rear of the quick release plate of the Really Right Stuff B9 Multiuse Bi-Directional Plate (B&H# REB9PLATE) may make it difficult or impossible to fit on the feet of some feet that are attached to the tripod ring of a 70-200mm lens. To be clear, it is designed to attach to that foot rather than to the ring itself. Either way, please contact us in chat, by phone, or by email to discuss choosing the right quick release plate for your needs as this is not likely to be it.

Q: 2. Do you recommend this for the 5D Mark IV

A: Sure, works well on the 5d4.

Q: 3. How long of a cable can I use with this mic? 50'? I am wanting to plug it into a Mevo camera. Thanks

A: the cable length is 18" (inches), you can order an extension cable: https://www.bhphotovideo.com/c/product/884592-REG/pearstone_mmsb_125b_stereo_mini_male_to.html?sts=pi&pim=Y

Q: 4. Would you need to provide power to an SSD drive's power socket in addition to the socket on this adapter?

A: yes you would need to, as you would to any HD

Q: 5. Would this mic work with a focustite scarlett, connected to a macbook pro?

A: Yes, the Sennheiser MKE 200 Microphone can be used with a Focusrite Scarlett. Since the MKE 200 requires plug-in power to operate, an adapter is needed to convert the mic's 3.5mm plug to XLR and also to convert 48V phantom power to plug-in power, which is typically between 3 to 10V. The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) is designed for that purpose.

Q: 6. Can I use the Beachtek SC25 3.5mm to 2.5mm TRS Output Cable to connect this mic to Fuji X100V camera?

A: Yes, you can use the Beachtek SC25 3.5mm to 2.5mm TRS Output Cable (B&H #BESC25) to connect the Sennheiser MKE 200 microphone to a Fujifilm X100V camera.

Q: 7. Does the mic have a tripod mount hole?

A: Yes, there is a 1/4 20'' thread on the bottom of the shoe mount.

Q: 8. Does it work with BH-55 ball head with lever release?

A: Yes it will.

Q: 9. Can I use this plate with the Benro IN00 Single Action Ball Head?

A: One would think so. The Benro IN00 Single Action Ball Head is supposed to be Arca Type compatible. The Benro IN00 Single Action Ball Head has a screw lock rather than a quick connect, which should remove the major risk of incompatibility.

Q: 10. Will this mic work on a Panasonic GH5S?

A: Yes this is compatible with the GH5S.