The light beige Countryman E6 Directional Earset Mic for Zaxcom Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this plate fit on the original Sony RX 100 ?

A: Yes the Really Right Stuff B9 Multiuse Bi-Directional Plate will fit the Sony RX100 camera.

Q: 2. Hi. Will the lip/dovetail reach the back of the base on a Pentax K-1? I currently have a similar plate without the lip/dovetail which does not really secure my camera in one spot, so it has a tendency to move around on the plate after a while. I was hoping that the lip/dovetail could reach the end of the base of the camera so that it would kind of lock itself in once tightened down.

A: Yes the lip fits perfectly on the Pentax K1 to keep the plate from rotating.

Q: 3. Would you need to provide power to an SSD drive's power socket in addition to the socket on this adapter?

A: yes you would need to, as you would to any HD

Q: 4. Can I use this on a Canon c300?

A: Yes, the Sennheiser MKE 200 Ultracompact Camera-Mount Directional Microphone can be used with any camera that has a 3.5mm microphone input capable of supplying plug-in power, or it can be connected to an XLR input that is capable of supplying phantom power when used together with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP).

Q: 5. OM-D-M1-II?

A: Yes, the Really Right Stuff B9 Multi-Use Bi-Directional Plate will work with the Olympus OM-D-M1-II.

Q: 6. I understand this mic was made primarily for cameras and smartphones/mobile, but would this work perfectly well on computers as well for video conferencing?

A: In theory, yes, teh Sennheiser MKE 200 Ultracompact Camera-Mount Directional Microphone could be used with a computer for video conferencing. If the computer does not have a dedicated 3.5mm microphone input connection, an interface such as the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter (BH #AUATR2XUSB) could be used: https://bhpho.to/3uzc5Ra

Q: 7. Can I put two B107 Mounting Screws in this plate?

A: Yes, The B107 is one of the most common mounting screw used on nearly all 1/4"-20 threaded mounting plates on the market.

Q: 8. Would this mic work with a focustite scarlett, connected to a macbook pro?

A: Yes, the Sennheiser MKE 200 Microphone can be used with a Focusrite Scarlett. Since the MKE 200 requires plug-in power to operate, an adapter is needed to convert the mic's 3.5mm plug to XLR and also to convert 48V phantom power to plug-in power, which is typically between 3 to 10V. The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) is designed for that purpose.

Q: 9. Does this plate fit the DBA-1 60mm QR clamp? Does it fit other arca-swiss compatible base clamps?

A: Yes, the Desmond Bi-Directional plate will fit the Desmond 60mm QR clamp, as it is an Arca-type plate. This will work with any Arca-Swiss compatible clamps.

Q: 10. Does this mic work with the native Apple video camera and Filmic Pro app?

A: When used with a proper Apple headphone jack to lighting adapter, B&H # APLAADAP, it will work with the native Apple camera app and Filmic pro on an iPhone.