The light beige Countryman E6 Directional Earset Mic with 3.5mm Locking Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Olympus, Roland, Sony, Tascam, Yamaha, or Zoom DM-420, DM-520, DM-620, DS-2400, DS-40, DS-51, DS-61, DS-71, LS-10, LS-14, R05, R09HR, PCM-D50, PCM-M10, DR-05, DR-07mkII, DR-08, PR-10, Pocketrak C24, Pocketrak W24, H1, H2, and H2n portable recorders.

For Stage, Theater, and Broadcast TV    Fits Select 3.5mm Recorders    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. The photo shows a blue centre component. What is this part made of hard plastic or aluminum?

A: The blue section is plastic, the foots are steel with a rubber insert, the red knob is machine aluminum and the ball/threaded shaft is also aluminum, the chrome rivets and pins are steel.

Q: 2. What is the diameter of the leg base when deployed open supporting a monopod ?

A: The diameter of the Benro 3-Leg Locking Base, with the legs extended, is 13.5".

Q: 3. Will this work with the Benro MSD46C72 SupaDupa Carbon Fiber Monopod?

A: The Benro 3-Leg Locking Base For Monopods is incompatible with the Benro MSD46C72 SupaDupa Carbon Fiber Monopod.

Q: 4. Will this Benro VT2 3 leg locking base fit & work on my Benro A48F monopod? It currently has the original rubber foot attached.

A: Yes it will fit. As for work, it depend what you are talking about.

Q: 5. Will this fit my Sirui p-326

A: The answer will be simple. I am not familiar with your Sirui Monopod, but if you can remove the bottom leg/pad of the monopod and it has a threaded hole, then you should be able to compare it with the thread of the 3-Leg of the Benro Locking Base. That information should be available from the B&H Website.

Q: 6. Will these casters fit on Manfrotto 032BASE Single Base for Autopole?

A: Yes, the leg of the Manfrotto 032BASE Single Base is round and 22mm in diameter. Check the Specifications tab for both products.

Q: 7. will this work with a Benro MAD49C Monopod with the rubber foot? if so how does one remove the foot?

A: As long as I know Benro make their monopod and tripod standard. That piece of 3 legs have some silver pins between the blue and black part, it tie them together. By pressing that pin to the inside it unlock the leg and you can then lift it up. I am using one of those wrist saling to peoples on shows, it have fluo color inside. u can add one to prevent the legs to re-open and lock back in place. I think this answer one of your question. The other one I think is about your monopod. The rubber part that you put on the ground is srewed in. So unscrew it and place it in secure place. Then screw the 3 legs at the same place. Keep an eye on it cause sometime it unscrew if not tie so hard.Hope it help.

Q: 8. Will this fit Avenger A2033 C-Stands?

A: This 110G wheels only fit Manfrotto stands with a 22mm leg. They will not fit the legs on an Avenger A2033 C-stand.

Q: 9. This seems much more sturdy than the standard Manfrotto legs for rheir monopodHow do they compare?

A: Can't compare.have no frame of reference. But it is small and solid and portable. I use it with smaller extension of the pod because the opened base, the spead does not call for leaving a camerslaUnattended in remote work. If u stay with the camera there is no problem, or. Set it on a hard surface. Panning, say for sports is a no no, ,but for a panoramic shot patched for a single image it will suffice.

Q: 10. what is usable depth of this drawer? My item is 14.1 inches on shortest side

A: The depth of the drawer is 14 inches and the width is 19 inches. It cannot hold an item that requires a depth of 14.1 inches.