The light beige Countryman E6 Directional Earset Mic, Detachable Cable, Hirose Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the length of the cord?

A: Hi Jake, the length of the power cable is 1.54 metres or 60 inches. Kind Regards, Steven in New Zealand

Q: 2. what is the difference between this and https://a href= http://www.bhphotovideo.com/c/product/1077443-REG/indipro_tools_ptlpd_power_tap_for_canon.html target= _blank www.bhphotovideo.com/c/product/1077443-REG/indipro_tools_ptlpd_power_tap_for_canon.html/a ?

A: Doesnt look like any difference. But I would be cautious buying the indiepro...I bought 3...and only 2 still work.

Q: 3. Will this convert the 20 pin out of the Canon ZSG-C10 Zoom Controller to BlackMagic 12 Pin Lens Control?

A: No, the Chrosziel Canon 20-Pin Hirose to Fujinon 12-Pin Adapter Cable for Servo Zoom Control (B&H# CHCABC20F12Z) is designed to be used with a Canon servo lens only. Among the issues would be a lack of power to the Blackmagic Design controller.

Q: 4. Will this work for the Godox C26 Battery Charger for AD600Pro Flash?

A: Yes

Q: 5. Will this be good to pair with the canon 5rc with a small rig 99 battery?

A: The IndiPRO Tools SAFETAP to Canon LP-E6 Regulated Dummy Battery Cable is a perfect choice to power the Canon R5c with an external power using the D-Tap.

Q: 6. What is the weight of the MX-HIROSE?

A: The Sound Devices MX-HIROSE Hirose DC Input Sled weighs 1.6 ounces (45.4 grams).

Q: 7. Does this lock to the battery like the audioroot cup?

A: Yes. The battery locks into the cup.

Q: 8. Mixpre 6 ii -- MX-Hirose -- Tilta NP-F Base Battery Plate , For this setup, Which power option shall i choose? 7.2v or 12V ( from Tilta Base Plate

A: The Sound Devices MX-HIROSE Hirose DC Input Sled for MixPre, MixPre-M & MixPre-II Mixer-Recorders needs 10-20 volts, so 12v would be appropriate for this situation.

Q: 9. Does this work with the lectrosonics ucr411a receiver?

A: The Deity Microphones SPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Barrel Jack Cable may not work with the Lectrosonics UCR411a Digital Hybrid Wireless Compact Receiver because of the locking DC plug on the cable. You will want to use a cable with a non-locking DC connector like the Lectrosonics PS-12 Power Cable - Coaxial Style to Hirose 7-4 pin (Betacam) Plug (B&H # LEPS12).

Q: 10. Will this power the Canon 18-80mm T4.4 Compact Servo lens? If not, what will?

A: The IDX System Technology C-ZLPRO D-Tap to Hirose Cable for Canon CINE-SERVO Zoom Lenses will not work with the Canon CN-E 18-80mm T4.4 COMPACT-SERVO Cinema Zoom Lens. It takes power from the camera. It cannot take power directly.