The light beige Countryman E6 Directional Earset Mic for Lectrosonics Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I have 4 UCR411s. I want to connect those to a single RF Venue Diversity Antenna. Would I use one of these for A signals from the UCR411s and another for the B signals? And then just use the input to go to the RF Venue fin? Or do I have the input/outputs of this thing wrong in my head?

A: This is possible to do. However, when you split the antennae feed to the receivers, you will suffer a reduction/ level loss. For that reason, it is suggested to use B&H# LEUFM144. Select 5dB boost and then your revers will all receive an adequate signal

Q: 2. Can I use this plate with the Benro IN00 Single Action Ball Head?

A: One would think so. The Benro IN00 Single Action Ball Head is supposed to be Arca Type compatible. The Benro IN00 Single Action Ball Head has a screw lock rather than a quick connect, which should remove the major risk of incompatibility.

Q: 3. How many rings does this album have? I have Style BTA-204/BR which is a 3 ring album but it is nor listed in you selections.

A: This album has two post binding. Additional pages and post extensions can easily be added.

Q: 4. I ordered this but need the bezel that was not included to mount it in my camera slot. How can I get one?

A: Which camera is it?

Q: 5. Will this mic work on a Panasonic GH5S?

A: Yes this is compatible with the GH5S.

Q: 6. Can I put two B107 Mounting Screws in this plate?

A: Yes, The B107 is one of the most common mounting screw used on nearly all 1/4"-20 threaded mounting plates on the market.

Q: 7. How i setup Lectrosonics SNA600a or Sennheiser A2003UHFwith Sennheiser Reiceiver 112G3? Is it feasible?

A: The SNA600a is like a slide rule. You loosen the screws and adjust the length so it matches the scale to the frequency you are operation on. Then tighten the screws and rotate the 2 arms so they are at 90 degreed to the scale. The Sennheiser antenna is not adjustable and covers the whole of the UHF range. These are 2 different kinds of antennas. The SNA600a is omnidirectional and the Sennheiser A2003UHF is directional. Which one is best would depend on the situation you are working in. Think of an omnidirectional mic vs. a cardioid. They have different pickup patterns and serve different purposes.

Q: 8. Will this fit a b-grip uno?

A: If it takes an arca Swiss yes if not no

Q: 9. I have four 411a receivers. Would this allow me to connect them all to two Betso Bowties or other external antenna?

A: It will, but this is a 1x8 splitter, so you would need one for each of the two antennae.

Q: 10. Does this unit include fiber driver and power supply?

A: The SWIT Portable Bi-Directional SDI to/from Optical Fiber Converter has power supply. This does not have fiber driver.