The tan Countryman E6 Directional Earset Mic for Lectrosonics Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What size is the barrel? Is it 2.1mm? or smaller?

A: It is smaller -- The power connector on the SmallHD focus is defined as follows: 1 x Barrel: 3.5 mm Outer, 1.1 mm Inner

Q: 2. Will this fit snug on a 70-200mm ring and not slip at all?

A: The ridge at the rear of the quick release plate of the Really Right Stuff B9 Multiuse Bi-Directional Plate (B&H# REB9PLATE) may make it difficult or impossible to fit on the feet of some feet that are attached to the tripod ring of a 70-200mm lens. To be clear, it is designed to attach to that foot rather than to the ring itself. Either way, please contact us in chat, by phone, or by email to discuss choosing the right quick release plate for your needs as this is not likely to be it.

Q: 3. I ordered this but need the bezel that was not included to mount it in my camera slot. How can I get one?

A: Which camera is it?

Q: 4. What size hex does this require?

A: The Really Right Stuff B9 Multi-Use Bi-Directional Plate indicates it includes a 5/32 Hex Key under the "In The Box" section under the Overview tab of our website.

Q: 5. Can this power a device which draws: 5.5W, 0.46A at 12V?

A: This device is specifically for powering the Redrock Micro microRemote System with a Canon LP-E6 style battery. It will have the proper draw for that system only and may not work with others.

Q: 6. Would this mic work with a focustite scarlett, connected to a macbook pro?

A: Yes, the Sennheiser MKE 200 Microphone can be used with a Focusrite Scarlett. Since the MKE 200 requires plug-in power to operate, an adapter is needed to convert the mic's 3.5mm plug to XLR and also to convert 48V phantom power to plug-in power, which is typically between 3 to 10V. The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) is designed for that purpose.

Q: 7. is it compatible with BM micro cinema camera?

A: Yes, You can utilize the the Canon LP-E6 Power Kit for your setup.

Q: 8. Does it fit on a Sony A7R IV, A7S III, and A1?

A: It will fit but it would not be ideal. The anti twist flange would push the camera further out and be less stable. This Sunwayfoto would be a better option for a bi directional plate: https://bhpho.to/3hZpT2O

Q: 9. How long is the cable?

A: It is about 1 meter in length.

Q: 10. does this fit Shure ULXD2/SM58 wireless handheld transmitters?

A: The Lectrosonics P1298 - Anti-Roll Sleeve for HH Transmitter should be compatible with the ULXD2/SM58 wireless handheld transmitter.