This 35' Gold AES DB25 to 4 XLR Male and 4 XLR Female Digital Snake Cable from Mogami is a useful cable designed for use with digital pro-audio interfaces. One end uses a single D-subminiature 25-pin screw-lock connector, while the other connects to four female XLR connectors and four male XLR connectors, providing eight channels (four in, four out) of digital audio routing for studio devices. Quality Mogami wiring and gold-plated connectors ensure reliable performance, and the included lifetime warranty lets you purchase your breakout cable without concern for cable life. This cable snake is a highly useful utility for any studio equipped with the appropriate AES compatible digital interfaces or patchbay systems.

1 x DB25 Connector    4 x XLR Male and 4 x XLR Female    For Professional Audio Interfaces    Gold-Plated Connectors    Quality Mogami Wiring    For Digital Interfaces Only

Related Questions and Answers

Q: 1. Which Mogami wire is used in this cable?

A: The Cable Techniques CT-PXD-325 3-Pin XLR Mogami Microphone Cable 110-Ohm Digital is constructed with 110 Ohm digital Mogami microphone cable like the Mogami W3080 110 Ohm AES/EBU Digital Audio Cable (B&H # MOW3080328BK).

Q: 2. trying to hook a line level mixing board and convert it to mic level and connect it to a Magewell USB Capture HDMI 4K Plus. Will this work?

A: This will work, with the appropriate cables (see links below) , it will reduce mixer output by 50dB, which may then be connected, with the proper cable, to a Mic input. https://www.bhphotovideo.com/c/product/68603-REG/Shure_A15LA_A15LA_Line_Adapter.html https://www.bhphotovideo.com/c/product/133543-REG/Comprehensive_XLRP_SPPS_3ST_EXF_Series_Stereo_1_4.html https://www.bhphotovideo.com/c/product/133524-REG/Comprehensive_XLRJ_MPS_3ST_EXF_Stereo_Mini_Male.html

Q: 3. Is thi the item to use when trying to attach a shotgun mic to my D750? Does it work to reduce noise coming through the mic?

A: The A85F serves a similar purpose however designed for PA systems with 1/4 inputs. Not compatible with the D750 which requires a different matching transformer with a 1/8 connection. If you have a self (battery) powered shotgun mic with XLR output and would like to connect it to a DSLR camera with a 1/8 input jack the Kopul LMT-100 is a proper adapter.

Q: 4. What about 48volt phantom power? Do the mics still get enough juice?

A: The Hosa Technology YXM-101.5 XLR Female to Dual XLR Male Audio Y-Cable is not designed to split signals from microphones directly and therefore may not provide adequate power to a microphone requiring 48 volts.

Q: 5. How long are the individual channel pigtails on each end of the bundled cable?

A: The distance from the start of the fan to the end is 2.5'.

Q: 6. Compatible with BlackMagic Teranex 2D analogue audio in/out??

A: The Hosa Technology DBK-258 - DB25-to-XLR AES/EBU Breakout Snake - 16.5' (5 m) 16.5' (5 m) would not work with the DB-25 connector (analog audio in/out) of the Blackmagic Design Teranex 2D Processor. You would need a breakout snake that is purely analog and not AES/EBU.

Q: 7. Does the 25' length include the "fan-out" portions at each end, or is it just the bundled portion? IOTW, what is the total length from a male connector to its corresponding female connector?

A: The Whirlwind MT-4-F-M-25 Medusa Multitrack Series Snake is 25 feet total length from end to end, including the fan-out portions on each end.

Q: 8. Will this fit a Sony ECM-680s mic ?

A: Hi Cristian, We can only recommend use of this cable with Lewitt mics. We cannot guarantee functionality with mics from any manufacturers. Best, AM&S Technical Support

Q: 9. Would this cable only work on RED or would it work on any other cameras with a Mini XLR input (say BMPCC 4K)?

A: I am not using my cable on a camera, but am using it on a Velodyne subwoofer with a calibration mike. Since it is a standard gender changer, I don't see why it would not work on your camera. I purchased mine because the mini XLR connector on my Velodyne is recessed and other cables I tried would not fit in the recessed hole. This cable is very well made.

Q: 10. Is this what I would use if I am connecting a mini mixer 4db out into a mic level channel on another board?

A: You should be able to use a standard cable to connect the output from the mini mixer to the input on another board. If the connectors you require are XLR female to 1/4" TRS male, you can most likely use a cable such as the Hosa Technology HXS-003 Balanced 3-Pin XLR Female to 1/4" TRS Male Audio Cable (3') - B&H# HOHXS003.