The light beige Countryman B2D Lavalier Mic for Shure Wireless Transmittersfrom Countryman B2D Lavalier Mic for Shure Wireless Transmittersfeatures a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a TA4F connector for direct connection to Shure MXW1 and MXW1/0=-Z11 wireless bodypack transmitters.

Hypercardioid Pattern    Fits Shure Transmitters    Headroom for Loud Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Medium (red band, -10 dB re W4) for Loud vocals

Related Questions and Answers

Q: 1. can this microphone work with external voice recorders such as Zoom h1n?

A: No, the Shure CVL Centraverse Cardioid Lavalier Microphone is not compatible for direct connection to the Zoom H1n Portable Handy Recorder. The CVL has a TA4F (4-pin mini-XLR female) connector and the input on the recorder is 3.5mm TRS. In order to use the CVL, you would need to use the Shure Wired TwinPlex Microphone Preamp with Belt Clip - TA4F to XLR (B&H # SHRPM400TQG) together with a phantom power supply such as the Xvive Audio P1 Portable Phantom Power Supply with Rechargeable Battery (B&H # XVP1), and an XLR female to 3.5mm TRS male cable like the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable - 1.5' (B&H # KOXRSM015B).

Q: 2. Can you adapt the XLR or 1/4 To go into a computer 3.5 mic jack safely without risk of damaging the computer or do I need something like a Scarlet And if I can adapt it without a scarlet witch adapter should I use I know the basics but I don’t know if the output of the mic is TS TRS TRRS

A: The best practice for connecting a mic to a computer would be through an audio interface like a Focusrite Scarlett or similar product. This will allow for better sound conversation to the computer, and lower noise possibilities.

Q: 3. what kind of adapter do I need to convert this to wired for use with the XLR inputs on my Zoom H4 recorder?

A: The Shure Wired TwinPlex Microphone Preamp with Belt Clip (TA4F to XLR) (BH #SHRPM400TQG) is recommended to convert the TA4F connector on the Shure CVL Centraverse Cardioid Lavalier Microphone to XLR for use with XLR input connections: https://bhpho.to/3QsFd6O

Q: 4. Will these work for stage singing, i.e., a musical with four singers, in both open spaces and closed venues? Thanks

A: This system could be a viable option for stage performance, but it depends on a few factors. First, know you will need 4 of these systems to allow for 4 wireless mics to run at the same time. Second, you would need to confirm which frequencies are available in your performance area, this would tell you what frequency ranges to use and whether this system can hand 4 mics at one time. This can be done using Shure's Wireless Frequency Finder. We would recommend giving us a call at 800-606-6969 to assist in finding that information. Lastly for musicals, you'd probably want a lower profile lav mic you could hide on the performers head, or in a costume. Here's a recommendation for that type of mic BH #SHTL47TOMTQG.

Q: 5. How long is the cord, what connector does it use?

A: This mic has a 4' cable length, and comes with a ta4f connection wired for Shure wireless systems.

Q: 6. Is this suitable for use with the MXW1 bodypack or do you need the WL185 instead?

A: Yes, the Shure MX185 Cardioid Wired Lavalier Microphone, with its XLR preamplifier removed, is compatible for use with the Shure MXW1 Hybrid Bodypack Transmitter with Microphone.

Q: 7. How long is the cord, what plug does it use?

A: The cable length is 51"/1.3m long, and it uses a TA4/mini-XLR-male cable connection.

Q: 8. Hello. I would like to connect the MX185 to my DSLR (Canon t7i) mini jack and need phantom power for it to work. Can I use something like the IK Multimedia iRig Pre? WL185 to RK100PK preamp to iRig Pre to DSLR (with TRRS to TRS adapter). Are there better options to get phantom power and connect to the DSLR? Many thanks.

A: The iRig Pre can work if used with a TRRS to TRS adapter like the Rode SC3 (B&H # ROSC3), but there are other camera-mountable systems like the Beachtek DXA-MICRO-PRO Active XLR Compact Adapter (B&H # BEDXAMICROP), Comica Audio CVM-AX3 Dual-Channel Audio Mixer for DSLRs (B&H # COCVMAX3), or Saramonic SR-PAX1 Two-Channel Audio Mixer, Preamp, Microphone Adapter (B&H # SASRPAX1) which are specifically for use with cameras. Please feel free to contact us if you would like further assistance.

Q: 9. What is the easiest and most lightweight way to use this microphone with a Sony A7S III camera? Which additional products would I need to buy?

A: To connect the Shure MX185 - Cardioid Wired Lavalier Microphone to a camera input such as that found on the Sony a7S III Mirrorless Camera, an adapter such as the Sony XLR-K3M Dual-Channel Digital XLR Audio Adapter (BH #SOXLRK3M) could be used to interface with the camera's Multi Interface Shoe. Alternatively, a camera mixer such as the Beachtek DXA-MICRO-PRO Active XLR Compact Adapter (BH #BEDXAMICROP) could be used to receive and power the MX185 over XLR connection and send signal into the a7S via its 3.5mm input.

Q: 10. is this good for noise enviroments? what is best use for this mic

A: This mic is good for speech and vocal.But I would recommend you this mic for speech and presentation. And also You have to adjust the mic gain control in the body pack. If you use the audio mixer, set the mic gain control knob to get the best sound. This is good for speech and vocal. Good luck.