The light beige Countryman B2D Lavalier Mic for WisyCom Transmittersfrom Countryman B2D Lavalier Mic for WisyCom Transmittersfeatures a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the B2D lavalier is equipped with a detachable cable that terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

Hypercardioid Pattern    Fits WisyCom Transmitters    Headroom for Loud Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Medium (red band, -10 dB re W4) for Loud vocals

Related Questions and Answers

Q: 1. Do I need anything that is not included to connect to a gh5s camera

A: This mic includes all that you need to connect to a Panasonic GH5S camera, which would provide plug-in power to the mic.

Q: 2. Can this be used in combination with earphones for phone calls?

A: Not to be used for phone calls. The in-line connector hosts a 1/8 TRRS and a dedicated switch that allows you to connect your headphones for monitoring your recording or a second iRig Mic Lav.

Q: 3. I need to replace the mounting clip and cant find the part. Is there any compatible one that can be used?

A: The WindTech TC-7 Set of Three Tie Clips for 1 to 2mm Lapel Microphones (Black), BH #WITC7 can be used as clips for this lavalier mic. They would connect to the cable just below the head of the mic.

Q: 4. How does this compare to the Zoom H1n? There are no reviews here nor in YouTube.

A: There are some advantages to the Zoom H1n and some for the Saramonic SR-Q2M. The Zoom is a bit smaller and lighter, but the Saramonic has metal construction, so it's a bit more substantial and rugged. So it depends on what you're looking for, lighter and smaller versus stronger and more rugged. The Zoom features a more detailed screen and editing features, while the Saramonic includes a remote, lavalier, case, furry windscreen and MicroSD Again it depends on what you're looking for, will the more detailed screen and editing features matter more than a more complete suite of accessories. If those accessories are something you want and need, the Saramonic is clearly a better value because those items add up when purchased separately.

Q: 5. How much depth on the edge of a desk is needed to safely clamp this arm onto? Would a 1" lip be enough? 1-1/2"?

A: Clearance requirements for the Elgato Wave Mic Arm have not been provided by Elgato, but typically for clamp mounting a broadcast arm you will want at least 2" of clearance.

Q: 6. Is it possible to mount this to a c-stand or light stand or does it always have to be mounted to a table?

A: The Elgato Wave Mic Arm comes with a flat, padded clamp that opens up to 2.4". It is not made for mounting to a C-stand, a light stand, or any kind of stand. However, you can use an adapter to be able to match the threading of the shock mount of your microphone to a light stand or C-stand. Alternatively, you can use a studio boom stand for your mic like the On-Stage SB96+ (B&H # ONSB96P), for example.

Q: 7. Does the mic require a battery? If so, what kind? Thanks.

A: The IK Multimedia iRig Mic Lavalier Mic within the IK Multimedia iRig Video Creator Bundle All-in-One Streaming Setup for Smartphones receives the power it requires ("plug-in power") from its connection to the smartphone or other compatible device as opposed to operating via battery power.

Q: 8. Can I record the external mic (lavalier) and the built-in mic at the same time and store into two tracks?

A: No. Plugging a microphone into the input will disable the onboard mics. It is only a two track recorder.

Q: 9. Is there any way to use this with an iPhone 12 pro that doesn't have a plug in spot?

A: Yes. You can use the iPhone 12 Pro with the IK Multimedia iRig Video Creator Bundle All-in-One Streaming Setup for Smartphones. All you need is the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) which will allow you to connect the IK Multimedia iRig Mic Lavalier Mic (B&H # IKLMSPT) that is included with the kit to the Lightning port on the iPhone.

Q: 10. Will this mic work with Facebook, specifically using an Iphone to do a Facebook Live?

A: Yes. Works great! I do recommend these to anyone doing live stuff etc. For the price you can't beat it and by that I just mean that the next best thing would be wireless but soundwise these are excellent... I did experience a little feedback when a host got a little too loud once though but overall no complaints