Camvate 3.5Mm Mini Plug Red Timecode Cable

Camvate 3.5mm Mini Plug Red Timecode Cable

Product Code: eq79836
Availability: In Stock

$87.60 $136.66

Qty

21 reviews Write a review

Description
Reviews (21)

Bring timecode from a Tentacle Sync into your RED camera for accurate synchronization and simplified postproduction with the CAMVATE 3.5mm Mini Plug to RED Timecode Cable. This 18" long cable features a right-angle 3.5mm TRS mini plug for connection to your Tentacle Sync timecode generator and a LEMO 4-pin male connector that can be hooked up to the sync port on your RED camera (excluding RED One).

Connects Tentacle Sync to RED Camera Right-Angle 3.5mm TRS Mini Plug LEMO 4-Pin Male Connector 18" Cable Length

Parameters
Connector 1	1/8" / 3.5 mm TRS Male (Right-Angle)
Connector 2	LEMO 4-Pin Male (Straight)
Cable Length	18" / 45.7 cm
Weight	0.8 oz / 21.3 g
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	4.95 x 3.65 x 0.45"

Designed for feeding a timecode signal from a Tentacle Sync timecode generator to a RED camera (except RED One)

Right-angle 3.5mm Neutrik TRS mini-plug connection to existing Tentacle unit

LEMO 4-pin male connector for hookup to RED camera

18" cable length

Related Questions and Answers

Q: 1. Are the levels repositionable after locking? Like the spring-loaded type of levers.

A: The CAMVATE Camera Baseplate (Black Levers) (B&H# CAC1448) does have ratcheting levers, yes.

Q: 2. Does this cable provide camera control via a Hi-5, or only run/stop?

A: The CAMVATE ARRI 7-Pin to RED 9-Pin and D-Tap Run/Stop Cable (24") only supports control of the start/stop trigger, no other camera control is supported.

Q: 3. Can I use this cable to power my Fiilex P360 pro to the 15Volt XLR 4 output of the Fxlion Mega Battery without any concerns?

A: While the P360 Pro uses a 2.5mm DC barrel connection, this particular cable has not been tested with it to our knowledge.

Q: 4. Does this cake work with the Dragon X?

A: You will need one of the RED DSMC2 Expander Modules.

Q: 5. Is there a split cable to support Timecode and RED Control through a single cable?

A: For Timecode and control, you need this: https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html?sts=pi&pim=Y

Q: 6. Hey there, does this come with the 15mm rods?

A: This does not come with 15mm rods.

Q: 7. would this work to jam sync between a timecode solutions UltraSync one and a dji osmo Pocket 3?

A: Theoretically, you can use the Sound Devices BNC to USB-C Timecode Cable for A20-Mini to jam sync the Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V with the DJI Osmo Pocket 3. However, according to DJI, they have not specifically tested if timecode via BNC will pass through the USB-C port of the Osmo Pocket 3.

Q: 8. How long is this cable?

A: The cable length is 420mm / 16in.

Q: 9. Can I use this cable to jam the time code from my Zoom F6 to my Komodo?

A: Yes you can.

Q: 10. Would this work between the RODE Wireless Pro Receiver and an FX6 BNC port?

A: The Sound Devices BNC to USB-C Timecode Cable for A20-Mini has not been tested with the Rode Wireless Pro, so unfortunately compatibility cannot be guaranteed.

Kenneth Noel	03/09/2024
[0.8 oz / 21.3 g] One of the great merits of this clamp is the fact that there are threaded holes on both sides of the clamp as well as on the butt of the clamp. This makes it possible to mount lights or monitors on structures oriented in many different directions. 5

Justin	02/09/2024
[0.05 lb] It works 5

Justin	02/09/2024
[0.05 lb] It works 5

Quinton	27/08/2024
[18" / 45.7 cm] Handy little cable, wouldn't be mad if the price came down though. 5

Quinton	27/08/2024
[18" / 45.7 cm] Handy little cable, wouldn't be mad if the price came down though. 5

Radomir	25/08/2024
[18" / 45.7 cm] I tried this on an A7S III but couldn't get it working, which is fine and not surprising. I would have been pleasantly surprised to see it working. No biggie. I shot a feature with an FS7 and two FX30s, and I had all 3 cameras in sync with two of these adapters. This is an awesome and super-helpful device that makes an FX30 or FX3 into a sort of higher tier camera, and I enjoy it so much. 5

Radomir	25/08/2024
[18" / 45.7 cm] I tried this on an A7S III but couldn't get it working, which is fine and not surprising. I would have been pleasantly surprised to see it working. No biggie. I shot a feature with an FS7 and two FX30s, and I had all 3 cameras in sync with two of these adapters. This is an awesome and super-helpful device that makes an FX30 or FX3 into a sort of higher tier camera, and I enjoy it so much. 5

Jeremy	22/08/2024
[0.05 lb] Great TC cable, well made. 5

Edward	03/08/2024
[0.8 oz / 21.3 g] What can I say it did the job for me. 5

STEVE	12/07/2024
[0.05 lb] THESE ARE WELL MADE. I USE THESE INSTEAD OF RIGHT ANGLE ADAPTERS BECAUSE THEY DON'T PUT STRAIN ON CAMERA PORTS WITH ROOM TO PLAY. I HAVE SEVERAL ONES FOR MY OTHER CAMERAS 5